4.9/ 5.0
99% pembeli merasa puas
231 rating • 67 ulasan
5(218)94.37%
4(12)5.19%
3(0)0%
2(0)0%
1(1)0.43%
Atur jumlah dan catatan
Stok Total: 330
Subtotal
Rp4.500
TP4056 Li-ion Lithium 18650 BMS + Protection via Micro USB v2 | 1A 5V
Rp4.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: COM o BMS
100% brand new and high quality
Charge module - Linear charging.
It has MICRO USB female
It still retain the input voltage wiring solder joints, can be very convenient to DIY
Specifications:
Current- 1A adjustable.
Charge precision- 1.5%.
Input voltage- 4.5V-5.5V.
Full charge voltage- 4.2V.
Led indicator- red is charging green is full charged.
Input interface- micro USB.
Work temperature- -10 to +85.
Inverted polarity- NO.
Size: 27mm X 17mm.
1 x 18650 batteries (6000 mAh) you can charge with this charger in parallel at the same time
NOTE:
Only one 18650 batteries (6000 mAh) you can charge with this charger in parallel at the same time
1. Ampere meter can only be connected to 5v input end of the module.
2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000 mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to chip.
6. NO Reversal polarity.
Charge module - Linear charging.
It has MICRO USB female
It still retain the input voltage wiring solder joints, can be very convenient to DIY
Specifications:
Current- 1A adjustable.
Charge precision- 1.5%.
Input voltage- 4.5V-5.5V.
Full charge voltage- 4.2V.
Led indicator- red is charging green is full charged.
Input interface- micro USB.
Work temperature- -10 to +85.
Inverted polarity- NO.
Size: 27mm X 17mm.
1 x 18650 batteries (6000 mAh) you can charge with this charger in parallel at the same time
NOTE:
Only one 18650 batteries (6000 mAh) you can charge with this charger in parallel at the same time
1. Ampere meter can only be connected to 5v input end of the module.
2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000 mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to chip.
6. NO Reversal polarity.
Ada masalah dengan produk ini?