Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp3.802.000
RunCam Link WASP HD Digital FPV Camera Suit 1280*720@120 FPS 4:3 5.8GHz System with ipex Antenna for DJI FPV Goggles DIY Parts
Rp3.802.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Support up to eight 5.8GHZ communication bands, to achieve eight machines flying together, each flyer enjoys exclusive channels, no interference between channels.
The remote control link is built into the sky side of the map transmission, and there is no need to purchase an additional receiver when using the DJI FPV remote control, which saves the steps of equipment pairing and shortens the preparation time before flight, making the operation more convenient and hassle-free.
Note: LINK/VISTA need to upgrade the new firmware to support Wasp 120 fps camera!
Parameter table
Model: RUNCAM LINK
Frequency:5.725-5.850GHz
Maximum Distance: FCC/SRRC:<4km & CE:<0.7km
Power: 7.4-26.4 Volt @ 4-9 Watts
Size: 29*29*13mm
Net weight: 19.5g
Model: RunCam Wasp
Sensor chip: 1/3 inch
Lens: Diagonal: 155° Horizontal: 125° Vertical: 96°
Coaxial line: 120mm
Size: 19*19*19mm
Shutter: Rolling shutter
Net weight: 7.5g (including cable)
Resolution: 720P@120 fps(4:3)
Supports 120fps, 50mBit and 4:3 aspect ratio, low latency mode as low as 28ms
Up to 8 Channels for 8 Drones
The HD Transmission system of the FPV Air Unit can allow up to eight drones to fly simultaneously. Each operator has an exclusive channel to reduce cross-interference to provide an optimal immersive experience.
DJI FPV Remote controller compatible
Users can connect their DJI FPV remote controller without having the purchase additional receivers. This reduces costs and is easy to setup for every pilot
Specifications:
Quantity: 1 pcs
Wheelbase: Screws
Model Number: LINK WASP
For Vehicle Type: Airplanes
Tool Supplies: Assembled class
Four-wheel Drive Attributes: Assemblage
Remote Control Peripherals/Devices: RECEIVERS
Upgrade Parts/Accessories: Adapter
RC Parts & Accs: Radio Systems
Material: Composite Material
Origin: Mainland China
Recommend Age: 14+y
Use: Vehicles & Remote Control Toys
The remote control link is built into the sky side of the map transmission, and there is no need to purchase an additional receiver when using the DJI FPV remote control, which saves the steps of equipment pairing and shortens the preparation time before flight, making the operation more convenient and hassle-free.
Note: LINK/VISTA need to upgrade the new firmware to support Wasp 120 fps camera!
Parameter table
Model: RUNCAM LINK
Frequency:5.725-5.850GHz
Maximum Distance: FCC/SRRC:<4km & CE:<0.7km
Power: 7.4-26.4 Volt @ 4-9 Watts
Size: 29*29*13mm
Net weight: 19.5g
Model: RunCam Wasp
Sensor chip: 1/3 inch
Lens: Diagonal: 155° Horizontal: 125° Vertical: 96°
Coaxial line: 120mm
Size: 19*19*19mm
Shutter: Rolling shutter
Net weight: 7.5g (including cable)
Resolution: 720P@120 fps(4:3)
Supports 120fps, 50mBit and 4:3 aspect ratio, low latency mode as low as 28ms
Up to 8 Channels for 8 Drones
The HD Transmission system of the FPV Air Unit can allow up to eight drones to fly simultaneously. Each operator has an exclusive channel to reduce cross-interference to provide an optimal immersive experience.
DJI FPV Remote controller compatible
Users can connect their DJI FPV remote controller without having the purchase additional receivers. This reduces costs and is easy to setup for every pilot
Specifications:
Quantity: 1 pcs
Wheelbase: Screws
Model Number: LINK WASP
For Vehicle Type: Airplanes
Tool Supplies: Assembled class
Four-wheel Drive Attributes: Assemblage
Remote Control Peripherals/Devices: RECEIVERS
Upgrade Parts/Accessories: Adapter
RC Parts & Accs: Radio Systems
Material: Composite Material
Origin: Mainland China
Recommend Age: 14+y
Use: Vehicles & Remote Control Toys
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan