5.0/ 5.0
100% pembeli merasa puas
7 rating • 1 ulasan
5(7)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
TDA1517P 2.1 Super Bass Mini Micro 3 CH Power Amplifier Board 6W+6W+25W HIFI Class D Digital Power Amplifier
Rp65.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Product features:
1. Use high-quality materials with guaranteed quality
2. PCB circuit board size reduction, more reasonable component layout, and increased product service life
3. The left and right channels use the low-power audiophile grade audio dedicated chip TDA1517P as the output stage, truly providing high-quality effects
4. Stable performance and high fidelity 2.1 Three channel ultra low bass 12V audio amplifier board
5. Wide application range, small volume can be easily embedded in various occasions
Parameters:
Power supply: DC6.5-15V (depending on the required output power), power adapter, switch mode power supply, battery can be used, and it is recommended to use a current of 3A or above
Bass output power: maximum 25W, it is recommended to use a 4-6 inch, 4-6 ohm, and 20-50W subwoofer
Left and right channel output power: 6W+6W, it is recommended to use a 2-4 inch, 4-8 ohm, and 3-25W full frequency speaker
The above power requirements require a power supply of around 13.5V
PCB material: FR-4 fiberglass board, thickness: 1.6mm
Potentiometer axis distance: 24mm. The diameter of the potentiometer mounting hole needs to be 7mm
Input interface: 3.5mm socket
Product List:
Power amplifier board * 1
Knob * 2
Nut * 2
Shim * 2
1. Use high-quality materials with guaranteed quality
2. PCB circuit board size reduction, more reasonable component layout, and increased product service life
3. The left and right channels use the low-power audiophile grade audio dedicated chip TDA1517P as the output stage, truly providing high-quality effects
4. Stable performance and high fidelity 2.1 Three channel ultra low bass 12V audio amplifier board
5. Wide application range, small volume can be easily embedded in various occasions
Parameters:
Power supply: DC6.5-15V (depending on the required output power), power adapter, switch mode power supply, battery can be used, and it is recommended to use a current of 3A or above
Bass output power: maximum 25W, it is recommended to use a 4-6 inch, 4-6 ohm, and 20-50W subwoofer
Left and right channel output power: 6W+6W, it is recommended to use a 2-4 inch, 4-8 ohm, and 3-25W full frequency speaker
The above power requirements require a power supply of around 13.5V
PCB material: FR-4 fiberglass board, thickness: 1.6mm
Potentiometer axis distance: 24mm. The diameter of the potentiometer mounting hole needs to be 7mm
Input interface: 3.5mm socket
Product List:
Power amplifier board * 1
Knob * 2
Nut * 2
Shim * 2
Ada masalah dengan produk ini?