Atur jumlah dan catatan
Stok Total: 11855
Subtotal
Rp3.221.000
AIYIMA A07 MAX Stereo Power Amplificador TPA3255 Class D Digital Speaker Amp 300Wx2 BTL Audio Amplifier for Passive Speaker
Rp3.221.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Product Description:
Model: A07 MAX
ReplaceableOp-Amp Chips:OPA2604AP, OPA2134, MUSE02,LME49720NA,LM4562, AD827AQ, etc.
Max Power Output: 300Wx2 4Ω(48V12A)
BTL MaxOutput Power:600W/2Ω(48V/12A)
Working Voltage:DC 24-48V
THD+N: 0.007%
Input sensitivity:1V
SNR: ≥110dB
AUX MaximumOutput level:1V
Frequency Response: 20Hz-20kHz(±1dB)
Package weight:1.27kg
Frequently Asked Questions:
Q: All my cables are connected, but there is no sound output?
A: 1. Check if the machine has started and if the indicator light is on.
2. Is the selection of mono/stereo mode and the connection of the speaker interface correct.
3. If the above two points are normal, check whether the playback device of the input soundsource is paused, muted, or the volume is at the minimum.
Q: Why is the sound distorted?
A: The input level may be too large. If the volume of the sound source equipment is adjustedto the maximum, and the volume of the machine is also adjusted to the maximum, it iseasy to be distorted. At this time, tum down the volume of the sound source input deviceor machine.
Q: Why does the volume of the machine remain the same, but the sound levelis different when connecting to different audio sources (for example,connect a CD first, then a mobile phone)?
A: The amplitude of electrical signals output by different playback devices is different. Forexample, mobile phones are usually 0.35V, while CDs are 1V. The natural sound size isdifferent.
Q: Why does the horn emit a loud electrical current sound or buzzing sound?
A: 1. If you are not using the original standard power supply, please replace the power supplyand test again. Many power supplies in the market have interference, which will causecurrent sound.
3. There is still noise after troubleshooting the above two points, Please confirm the noiseis from the external or the internal. Disconnect all inputs, only retain the power supplyand output cable, if the noise disappears, that means the noise is from the audio input.If the
Model: A07 MAX
ReplaceableOp-Amp Chips:OPA2604AP, OPA2134, MUSE02,LME49720NA,LM4562, AD827AQ, etc.
Max Power Output: 300Wx2 4Ω(48V12A)
BTL MaxOutput Power:600W/2Ω(48V/12A)
Working Voltage:DC 24-48V
THD+N: 0.007%
Input sensitivity:1V
SNR: ≥110dB
AUX MaximumOutput level:1V
Frequency Response: 20Hz-20kHz(±1dB)
Package weight:1.27kg
Frequently Asked Questions:
Q: All my cables are connected, but there is no sound output?
A: 1. Check if the machine has started and if the indicator light is on.
2. Is the selection of mono/stereo mode and the connection of the speaker interface correct.
3. If the above two points are normal, check whether the playback device of the input soundsource is paused, muted, or the volume is at the minimum.
Q: Why is the sound distorted?
A: The input level may be too large. If the volume of the sound source equipment is adjustedto the maximum, and the volume of the machine is also adjusted to the maximum, it iseasy to be distorted. At this time, tum down the volume of the sound source input deviceor machine.
Q: Why does the volume of the machine remain the same, but the sound levelis different when connecting to different audio sources (for example,connect a CD first, then a mobile phone)?
A: The amplitude of electrical signals output by different playback devices is different. Forexample, mobile phones are usually 0.35V, while CDs are 1V. The natural sound size isdifferent.
Q: Why does the horn emit a loud electrical current sound or buzzing sound?
A: 1. If you are not using the original standard power supply, please replace the power supplyand test again. Many power supplies in the market have interference, which will causecurrent sound.
3. There is still noise after troubleshooting the above two points, Please confirm the noiseis from the external or the internal. Disconnect all inputs, only retain the power supplyand output cable, if the noise disappears, that means the noise is from the audio input.If the
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan