Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp2.500.000
DATAKOM DKG-151 Generator Manual Start Control Panel
Rp2.500.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Elektronik
DATAKOM DKG-151 Generator Manual Start Control Panel
INPUTS
DC SUPPLY: 12 or 24 volts DC, ( + ) and (-) terminals.
LI: Generator phase voltage.
NEUTRAL: Generator neutral terminal.
HIGH TEMP SWITCH: Negative closing switch input.
LOW OIL PRESSURE: Negative closing switch input.
AUX: Spare fault input. A negative supply connection to this input will cause the engine immediately stopped and an alarm given (independent of the protection hold-off timer). CHARGE: Connect the charge alternator's D+ end to this terminal. This terminal will supply the excitation current and measure the voltage of the charge alternator.
OUTPUTS
FUEL SOLENOID: 10amps@28V-DC.
START: 10amps@28V-DC.
AUXILIARY: 10amps@28V-DC.
OPTIONS
JUMPER SELECTABLE STANDARD FEATURES:
Genset control,
Activate to Start,
Energize to Stop,
50Hz nominal,
60Hz nominal.
OPTIONAL FEATURES: (SUBJECT TO SPECIAL ORDER)
Engine control (without alternator),
Remote start (DKG-152),
Negative pulling semiconductor outputs (DKG-153).
TECHNICAL SPECIFICATIONS
Alternator Voltage: 1 5 to 300 V-AC
Alternator Frequency: 50 or 60 Hz nominal.
Overspeed: nominal frequency + 14% ( + 24% overshoot)
Underspeed: 25Hz DC
Supply Range: 8 to 33 V-DC.
Current consumption: 80mA max. (Relay outputs open).
Charge fail threshold: 6 V-DC.
Charge excitation current: via 82 ohms resistor connected to the FUEL output.
Operating temp.: -20°C (-4°F) to 70 °C (1 58°F).
Storage temp.: -30°C (-22°F) to 80 °C (1 76°F).
Maximum humidity: 95% non-condensing.
Dimensions: 72x72x38mm (WxHxD)
Panel cutout dimensions: 68x68 mm
Weight: 140g (approx.)
Installation: Front panel mounted. Retaining steel spring provided.
Conformity (EU directives)
73/23/EEC and 93/68/EEC (low voltage)
89/336/EEC, 92/31/EEC and 93/68/EEC (EMC)
Norms of reference:
EN 61010 (safety requirements)
EN 50081-2 (EMC requirements)
EN 50082-2 (EMC requirements)
INPUTS
DC SUPPLY: 12 or 24 volts DC, ( + ) and (-) terminals.
LI: Generator phase voltage.
NEUTRAL: Generator neutral terminal.
HIGH TEMP SWITCH: Negative closing switch input.
LOW OIL PRESSURE: Negative closing switch input.
AUX: Spare fault input. A negative supply connection to this input will cause the engine immediately stopped and an alarm given (independent of the protection hold-off timer). CHARGE: Connect the charge alternator's D+ end to this terminal. This terminal will supply the excitation current and measure the voltage of the charge alternator.
OUTPUTS
FUEL SOLENOID: 10amps@28V-DC.
START: 10amps@28V-DC.
AUXILIARY: 10amps@28V-DC.
OPTIONS
JUMPER SELECTABLE STANDARD FEATURES:
Genset control,
Activate to Start,
Energize to Stop,
50Hz nominal,
60Hz nominal.
OPTIONAL FEATURES: (SUBJECT TO SPECIAL ORDER)
Engine control (without alternator),
Remote start (DKG-152),
Negative pulling semiconductor outputs (DKG-153).
TECHNICAL SPECIFICATIONS
Alternator Voltage: 1 5 to 300 V-AC
Alternator Frequency: 50 or 60 Hz nominal.
Overspeed: nominal frequency + 14% ( + 24% overshoot)
Underspeed: 25Hz DC
Supply Range: 8 to 33 V-DC.
Current consumption: 80mA max. (Relay outputs open).
Charge fail threshold: 6 V-DC.
Charge excitation current: via 82 ohms resistor connected to the FUEL output.
Operating temp.: -20°C (-4°F) to 70 °C (1 58°F).
Storage temp.: -30°C (-22°F) to 80 °C (1 76°F).
Maximum humidity: 95% non-condensing.
Dimensions: 72x72x38mm (WxHxD)
Panel cutout dimensions: 68x68 mm
Weight: 140g (approx.)
Installation: Front panel mounted. Retaining steel spring provided.
Conformity (EU directives)
73/23/EEC and 93/68/EEC (low voltage)
89/336/EEC, 92/31/EEC and 93/68/EEC (EMC)
Norms of reference:
EN 61010 (safety requirements)
EN 50081-2 (EMC requirements)
EN 50082-2 (EMC requirements)
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan