Atur jumlah dan catatan
Stok Total: 100000
Subtotal
Rp7.000.000
RF Signal Generator 35MHz to 4.4GHz via USB +16dBm Plus
Rp7.000.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Material
RF Consultants, Test Engineers, Educators, Antenna Range Technicians, Production Test Engineers, Site Survey Technicians and Ham Radio Enthusiasts
TPI Synthesizer FEATURES
Output frequency range: 35 MHz to 4400 MHz
Low phase noise VCO (1GHz 10Khz offset = -91dBc/Hz)(2.4GHz 10KHz offset = -86dBc/Hz)
Typical rms jitter: 0 .4 ps rms
Programmable output power level
Cycle slip reduction
Internal Reference is 10MHz Temperature Compensated Clock Oscillator at +/-1.5 ppm over temperature.
There is a buffered reference output available at front panel. The Reference is accessed via a BNC connector. The output will drive a 50 ohm coaxial cable. DC Coupled 0v to 3.3v
There is an External 10MHz Reference Input on the back panel (BNC). When selected the External input port is active and the on-board reference is powered down. Any standard 10MHz reference will work.
Output Power is available from +10dBm to +16dBm +/- 2dB. I guarantee +15dBm at highest power setting with all frequencies with most frequencies at +16dBm or higher. 4 Power levels
RF Step Features:
RF Step function with 1KHz resolution and selectable time per step
Single Step function Up/Down selectable step size
Single Step Function or Continuous loop
OOK Modulation
OOK modulation. With OOK you can input a pulse train 0v to 3.3V (5V max) using for example an arbitrary function generator. EMC Techs use it for immunity testing by applying a 1KHz 50% Duty Cycle input into the modulation port (see photo of 35MHz RF output with 1KHz On-Off-Keying). FM Modulation ON REQUEST. You Choose OOK or FM
Other Features:
Lock Detect LED front panel. When the LED is on it indicates that the Frequency is locked and stable.
Standard SMA RF output AC Coupled (50 ohm)
Powered by USB 2.0 port (< 250ma)
TPI Synthesizer FEATURES
Output frequency range: 35 MHz to 4400 MHz
Low phase noise VCO (1GHz 10Khz offset = -91dBc/Hz)(2.4GHz 10KHz offset = -86dBc/Hz)
Typical rms jitter: 0 .4 ps rms
Programmable output power level
Cycle slip reduction
Internal Reference is 10MHz Temperature Compensated Clock Oscillator at +/-1.5 ppm over temperature.
There is a buffered reference output available at front panel. The Reference is accessed via a BNC connector. The output will drive a 50 ohm coaxial cable. DC Coupled 0v to 3.3v
There is an External 10MHz Reference Input on the back panel (BNC). When selected the External input port is active and the on-board reference is powered down. Any standard 10MHz reference will work.
Output Power is available from +10dBm to +16dBm +/- 2dB. I guarantee +15dBm at highest power setting with all frequencies with most frequencies at +16dBm or higher. 4 Power levels
RF Step Features:
RF Step function with 1KHz resolution and selectable time per step
Single Step function Up/Down selectable step size
Single Step Function or Continuous loop
OOK Modulation
OOK modulation. With OOK you can input a pulse train 0v to 3.3V (5V max) using for example an arbitrary function generator. EMC Techs use it for immunity testing by applying a 1KHz 50% Duty Cycle input into the modulation port (see photo of 35MHz RF output with 1KHz On-Off-Keying). FM Modulation ON REQUEST. You Choose OOK or FM
Other Features:
Lock Detect LED front panel. When the LED is on it indicates that the Frequency is locked and stable.
Standard SMA RF output AC Coupled (50 ohm)
Powered by USB 2.0 port (< 250ma)
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan