YUSHI DL Type Grooves Impact Devices Hardness Probe for Leeb Hardness

YUSHI DL Type Grooves Impact Devices Hardness Probe for Leeb Hardness Tester

Description
D Probe - up to 68 HRC
This is the standard unit for the majority of hardness measurements with a wide measuring range. Impact bodies tend to wear out at the high end of the hardness range.

DC Probe - up to 68 HRC
This probe is short and convenient in small places - requires a loading stick.

DL Probe - up to 68 HRC
This probe as a more slim front section (Ø 4 x 50 mm), that is used in confined surfaces such as gear wheels.

D+15 Probe - up to 68 HRC
This probe has a slim front section (elongated impact body, coil position 15 mm elevated) and is used for measuring grooves or recessed surfaces.

C Probe - up to 70 HRC
The C Probe is used on surface hardened, coated thin wall components.
This probe reduced impact energy (≈1/4 of the D Probe Unit).

Impact Device G - up to 646 HB
The G Probe is used on heavy, rough, cast and forged work pieces.
This probe has increased impact energy (≈9 x of the D Probe Unit).


Differen