UNO R3 LC 5V 3.3V Develop Board Arduino Compatible 10 12 16bit ADC

Harga Untuk 1 Pcs

Spesifikasi:
MassDuino UNO LC
Arduin IDE Support
Highly compatible to UNO R3
32KB Flash 2KB RAM
10/12/16Bit ADC
/*======================================================
analogRead()// 10bit ADC, Compatible to UNO R3
analogRead_12bits()// 12bit ADC , 130 sps
analogRead_16bits()// 16bit ADC , 125 sps
======================================================*/

Overview
Massduino UNO LC is an Arduin compatible board, It’s based on Arduin UNO R3 design, So you can use MassDuino UNO LC as Arduin UNO, All Code, shield and IDE for Arduin UNO R3 are also valid on MassDuino UNO LC, Some visible improvement on hardware make MassDuino more flexible and easier use , For example: 3.3V or 5V IO selectable allow you connect some 3.3V modules (such as XBee) to Massduino directly.

Parameter
Microcontroller MD328D
Operating Voltage 5V or 3.3V
Input Voltage (recommended) 7-12V
Input Voltage (limit) 6-35V
Digital I/O Pins 14 (of which 6 provide PWM output)
PWM Digital I/O Pins 6
Analog Input Pins 6
DC Current per I/O Pin 20 mA
DC Current for 5V Pin 880mA(See Notice)
DC Current for 3.3V Pin 600 mA
Flash Memory 32 KB

of which 0.5 KB used by bootloader

SRAM 2 KB
EEPROM 1 KB
Clock Speed 16 MHz
Length 68.6 mm
Width 53.4 mm
Notice
The 5V Current limit is depended on the voltage difference between input and output , the regulator power consumption can be calculated below:
Pcm = (Vin - Vout) * Icm
In MassDuino UNO LC’s design , the Pcm must limit within 3.5W