Shure SM86 Cardioid Condenser Microphone

Shure SM86 Cardioid Condenser Microphone SM86 Cardioid Condenser Microphone The SM86 is an award-winning, rugged cardioid condenser microphone with an extended high frequency response. Constructed with a three-point shock mount and a two-stage internal pop filter, the tailored frequency response of the SM86 delivers consistently smooth reproduction of lead vocals, even under the most extreme performance conditions. Features • Condenser cartridge for studio quality sound • Tailored frequency response for a clear reproduction of vocals • Rugged construction withstands the rigors of touring sound • Cardioid polar pattern minimizes unwanted background noise • Excellent choice for stage monitors and personal monitors • Built-in three-point shock mount minimizes handling noise • Two-stage pop filter reduces wind and breath noise Type Condenser Frequency Response 50 to 18,000 Hz Polar Pattern Cardioid Sensitivity (at 1,000 Hz) Open circuit voltage: -50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL) Impedance 150 Ω at 1 kHz Recommended minimum load impedance: 600 Ω Output Clipping Level 1000 Ω load at 1,000 Hz: +3 dBV (1.41 V) Maximum SPL (at 1,000 Hz) 1000 Ω load (1% THD): 147 dB Self-Noise 23 dB typical, A-weighted Dynamic Range (1000 Ω) 124 dB (maximum SPL to A-weighted noise level) Signal-to-Noise Ratio 71 dB at 94 dB SPL (IEC 651)* *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector Power Requirements 11 to 52 Vdc, 5.2 mA Case Dark gray, enamel-painted, die-cast with a stainless steel grille Connector Three-pin professional audio connector (male XLR type) Weight 284 g Dimensions 183 mm L x 49 mm W