Kompon APLus BERAT = 20 KG 1 Gojek instant = 2 Zak.. 1 Grab instant = 1 Zak.. Aplus Cornice Adhesive can be used to covering the wall cracks or unsmooth surfaces and tiny holes at the wall. For the mixing it only needs clean water. This application can only be used for interior purpose. Specification refer to ASTM C 475. Product Data Working Time : 15 minutes Preparation Time : 18 minutes Adhesion Time : 1 minute Drying Time : approximately 48 hours Mixing Ratio : 2 parts of cornice adhesive, 1 part of clean water Capacity : 20 kg to stick / join 180 m profile lists Lifetime : 9 months 12 months Storage : It is recommended to be stored in sealed condition and dry, avoid high temperature areas Packaging : 1 zak: 5kg or 20kg. Mixing Method Always use clean water and container. Pour cornice adhesive into 10-12 liter water with 20 kg cornice adhesive. Leave for 1-2 minutes, mix thoroughly until it thickens. Avoid stirring for too long as it will fasten drying time. Every time the mixing is done, avoid possibility of mixing with the previous mixture or other types of mixture. This will fasten the drying.