Atur jumlah dan catatan
Stok Total: 150
Subtotal
Rp8.048.000
CNC Stone Processing 3.2kw ER20 Water-Cooled Spindle Motor 4 Bearings 220V 380VΦ100X320MM, Used For CNC Router Engraving Machine
Rp8.048.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
CNC Stone Processing 3.2kw ER20 Water-Cooled Spindle Motor 4 Bearings 220V 380VΦ100X320MM, Used For CNC Router Engraving Machine
Sebelum order mohon dibaca rincian pd deskripsi :)
- Barang dikirim langsung dr Luar Negeri
- Estimasi pengiriman 15 Harian Sampai Alamat
- harga yang dipajang sudah full payment tapi sewaktu- waktu harga bisa saja berubah berdasarkan ketentuan cukai !!
- Packing Safety, Seller Amanah :)
- Jaminan uang kembali jika barang diterima tidak sesuai !!!
Model: GDZ-100-24R/3.2F
Middle body diameter: Φ100*320MM
Speed regulation mode: change the spindle speed through the three-phase output inverter and adjust the frequency of the inverter.
Cooling method: water cooling
Power interface: YX20-4 pin waterproof aviation plug is optional. The aviation plugs marked "1", "2", "3", "4", "1", "2", "3" are connected to the inverter (U, V, W), and 4 is connected to the inverter. Changer. The converter grounds the equipment.
Power: 3.2kw
Voltage: 220v 380v
Current: 12A
Frequency: 400Hz
Speed: 24000rpm
Runout: less than 0.01mm
Bearing type: 7005C/P4*2,7003C/P4*2
4 ceramic ball bearings
Number of phases: 3
Chuck: ER20
Water-cooled ER20 chuck
Grease lubrication
Main application: Carving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, two-color board (ABS) and other non-metals, and also can carve marble, bluestone, granite and other stones
●The working environment temperature of the spindle is usually -10~40.
●Before installing the first electric spindle to rotate the spindle head by hand, you should feel flexibility and no blockage.
P4 fully sealed angular contact ceramic bearings can extend the service life of the spindle.
The longer the length, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
The accuracy is 0.01mm, and the coaxial cable is less than 0.0025mm
1. Our main shaft uses 4 bearings.
2. Bearings are resistant to high temperature and low heat
3. Ceramic ball bearings have low friction, low noise and long service life.
●When the spindle is stored and transported, the bearing condition inside the high-speed grease will change, and the customer should run it at low speed for 30 minutes. Then increase slowly at a speed of 3000 rpm, running for 20 minutes each time. The spindle and inverter should work together. The specifications and parameter settings of the inverter match the spindle parameters.
●To connect the inverter main shaft, the three-phase inverter power cor
Sebelum order mohon dibaca rincian pd deskripsi :)
- Barang dikirim langsung dr Luar Negeri
- Estimasi pengiriman 15 Harian Sampai Alamat
- harga yang dipajang sudah full payment tapi sewaktu- waktu harga bisa saja berubah berdasarkan ketentuan cukai !!
- Packing Safety, Seller Amanah :)
- Jaminan uang kembali jika barang diterima tidak sesuai !!!
Model: GDZ-100-24R/3.2F
Middle body diameter: Φ100*320MM
Speed regulation mode: change the spindle speed through the three-phase output inverter and adjust the frequency of the inverter.
Cooling method: water cooling
Power interface: YX20-4 pin waterproof aviation plug is optional. The aviation plugs marked "1", "2", "3", "4", "1", "2", "3" are connected to the inverter (U, V, W), and 4 is connected to the inverter. Changer. The converter grounds the equipment.
Power: 3.2kw
Voltage: 220v 380v
Current: 12A
Frequency: 400Hz
Speed: 24000rpm
Runout: less than 0.01mm
Bearing type: 7005C/P4*2,7003C/P4*2
4 ceramic ball bearings
Number of phases: 3
Chuck: ER20
Water-cooled ER20 chuck
Grease lubrication
Main application: Carving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, two-color board (ABS) and other non-metals, and also can carve marble, bluestone, granite and other stones
●The working environment temperature of the spindle is usually -10~40.
●Before installing the first electric spindle to rotate the spindle head by hand, you should feel flexibility and no blockage.
P4 fully sealed angular contact ceramic bearings can extend the service life of the spindle.
The longer the length, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
The accuracy is 0.01mm, and the coaxial cable is less than 0.0025mm
1. Our main shaft uses 4 bearings.
2. Bearings are resistant to high temperature and low heat
3. Ceramic ball bearings have low friction, low noise and long service life.
●When the spindle is stored and transported, the bearing condition inside the high-speed grease will change, and the customer should run it at low speed for 30 minutes. Then increase slowly at a speed of 3000 rpm, running for 20 minutes each time. The spindle and inverter should work together. The specifications and parameter settings of the inverter match the spindle parameters.
●To connect the inverter main shaft, the three-phase inverter power cor
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan