LOCTITEE 222/242/243/262/263/270/271/272/277/290

Catatan : Lem jenis ini adalah lem anaerobik dan perlu dicampur dengan udara, sehingga untuk mencegahnya mengeras kapasitas botol lebih besar dua kali lipat dari lem. Features: Loctite 222 Suitable for most metal surfaces, removable with common tools, for locking and sealing of M2-M12 threads. Lubricity to achieve accurate clamping load Loctite 241 Used for lock and seal of M6 - M2o thread. It is a thread locking agent which can be disassembled with common tools. Lubricity to achieve accurate clamping load Loctite 242 Product features: This product under the condition of air isolation in the two close together between the metal curing, especially suitable for the inert surface to prevent its due to shock and vibration caused by the loosening and leakage Loctite 243 The liquid oxygen type seal product is shockproof, shockproof and leakproof Loctite 262 Lock seal for threads up to M20 is a permanent lock thread locking agent with excellent rust and corrosion resistance in extreme chemical environments Loctite 263 Suitable for permanent locking of stud bolts and pressure parts for heavy duty applications, high strength formula combines all advantages in one. Heat resistance to 180°C enhances reliability for high temperature applications Loctite 270 To avoid loosening and leakage of threaded fasteners, especially for heavy load parts, such as cylinder head stud, pump cover stud nut, and other heavy load fasteners Lottite 271 used for permanent locking and sealing of threads below M36 Lottite 272 Used for cylinder double head thread locking can be quickly cured including without special surface treatment firmware recommended for bolt disassembly up to diameter 1.5 where heating and the use of tools are required Loctite 277 Permanent locking and sealing for threads up to 36 prevents thread rusting and corrosion, heating and tool disassembly Loctite 290 For m6-M12 thread locking and sealing can also be used to seal weld castings such as sand holes (0.254mm below