5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Kejar Diskon
Berakhir dalam
15 hari
14 hari3 jam41 menit19 detik
Atur jumlah dan catatan
Stok Total: Sisa 3
harga sebelum diskonRp65.000
Subtotal
Rp64.350
Gunting Okulasi Stek Sambung Batang Tanaman Grafting Pruning Tool
Rp64.350
diskon 1%
Harga sebelum diskon Rp65.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Perkakas
Gunting Grafting Okulasi Sambung Batang Tanaman Grafting Pruning Tool.
Gunting okulasi ini sangat fungsional & ergonomis, bisa untuk memotong dahan kecil, untuk memperbaiki tanaman,
pohon terutama yang merambat, seperti anggur, atau untuk yang gemar menata pohon bonsai,
sangat cocok untuk anda yang gemar berkebun.
Peringatan!
Jauhkan Alat ini dari jangkauan anak-anak !!!
Product Features :
Rootstock and scion it is easy to match the U-cut-cut or -cut, rapid healing.
Using easily and fastly.
Grafting method than the traditional savings.
The time and effort Blade can be replaced.
Use the pruner to cut useless branches from the plant.
Product Specifications :
For the knife
Materials : Carbon Steel, ABS and Aluminum
Color : Black
Cut grafting stocks from 5mm up to 1.4cm diameter
Trimming blades 3mm thick
Phillips screwdriver with red handle
Size 27cm * 10cm/10.5inch * 3.9inch
(1cm=0.39Inches)
A wrench
2 additional blades
How to use :
Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
Step 5: The grafting tool with "V & U & " blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.
Note : Keep out of reach of children !!! Do Not use on dry or old hard wood !!!
Gunting okulasi ini sangat fungsional & ergonomis, bisa untuk memotong dahan kecil, untuk memperbaiki tanaman,
pohon terutama yang merambat, seperti anggur, atau untuk yang gemar menata pohon bonsai,
sangat cocok untuk anda yang gemar berkebun.
Peringatan!
Jauhkan Alat ini dari jangkauan anak-anak !!!
Product Features :
Rootstock and scion it is easy to match the U-cut-cut or -cut, rapid healing.
Using easily and fastly.
Grafting method than the traditional savings.
The time and effort Blade can be replaced.
Use the pruner to cut useless branches from the plant.
Product Specifications :
For the knife
Materials : Carbon Steel, ABS and Aluminum
Color : Black
Cut grafting stocks from 5mm up to 1.4cm diameter
Trimming blades 3mm thick
Phillips screwdriver with red handle
Size 27cm * 10cm/10.5inch * 3.9inch
(1cm=0.39Inches)
A wrench
2 additional blades
How to use :
Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
Step 5: The grafting tool with "V & U & " blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.
Note : Keep out of reach of children !!! Do Not use on dry or old hard wood !!!
Ada masalah dengan produk ini?