Atur jumlah dan catatan
Stok Total: 179
Subtotal
Rp345.700
ESP32-C3 OLED Module 0.42Inch White Light Display Support 2.4GHz Wifi Bluetooth5.0 Electronic Development Board Type-C Interface
Rp345.700
- Kondisi: Baru
- Waktu Preorder: 28 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
ESP32-C3 OLED Module 0.42Inch White Light Display Support 2.4GHz Wifi Bluetooth5.0 Electronic Development Board Type-C Interface
Deskripsi :
Product features:
1. This development board onboard 0.42 inch OLED display and ceramic antenna, Type-C USB interface, reset button and start button, easy to operate.
2. Rich peripheral interface, with a wealth of peripherals and functions, suitable for IoT, wearable devices and smart home and other small projects and scenarios.
3. Low power consumption design, optimized power management system supports a variety of low power consumption modes, suitable for battery-powered devices, extending battery life.
4. Support 2.4GHz Wi-Fi and Bluetooth low power 5.0, which is suitable for the wireless connection needs of various iot devices.
5. Cost-effective, relative to the performance and features it provides, the ESP32-C3 is cost-effective, suitable for large-scale deployment of iot projects.
Product Description:
ESP32-C3 development board is a microcontroller that supports 2.4GHz Wi-Fi and Bluetooth low energy, based on RISC-V architecture, suitable for Ard, Micropython and other development environments. A wide range of peripherals and features for small projects and scenarios such as IoT, wearables and smart homes. At the same time, onboard 0.42 inch OLED display and ceramic antenna, Type-C USB interface, reset button and start button, easy to operate.
Product parameters:
Voltage: 3.3~6V
WiFi:802.11b/g/n protocol, 2.4GhHz
Bluetooth :BT 5.0
SPI Flash: built-in 4M
Pin interface: 1xI2C, 1xSPI, 2xUART, 11xGPIO(PWM), 4xADC
Onboard LED blue light: GPIO8 pin
BO0: Download button, long press BO0 key and plug in USB cable, release the hand to enter "download mode"
RST: Reset button to restart or reset the program.
USB interface: can be used as the power supply of the circuit board or the communication interface connecting the PC and the ESP32C3.
Size: 24.8mm*20.45mm
Attention:
1. This document only represents the product cognition and parameters at the time of editing, and is subject to change without prior notice.
2. If an external power supply is required, just connect
.
Deskripsi :
Product features:
1. This development board onboard 0.42 inch OLED display and ceramic antenna, Type-C USB interface, reset button and start button, easy to operate.
2. Rich peripheral interface, with a wealth of peripherals and functions, suitable for IoT, wearable devices and smart home and other small projects and scenarios.
3. Low power consumption design, optimized power management system supports a variety of low power consumption modes, suitable for battery-powered devices, extending battery life.
4. Support 2.4GHz Wi-Fi and Bluetooth low power 5.0, which is suitable for the wireless connection needs of various iot devices.
5. Cost-effective, relative to the performance and features it provides, the ESP32-C3 is cost-effective, suitable for large-scale deployment of iot projects.
Product Description:
ESP32-C3 development board is a microcontroller that supports 2.4GHz Wi-Fi and Bluetooth low energy, based on RISC-V architecture, suitable for Ard, Micropython and other development environments. A wide range of peripherals and features for small projects and scenarios such as IoT, wearables and smart homes. At the same time, onboard 0.42 inch OLED display and ceramic antenna, Type-C USB interface, reset button and start button, easy to operate.
Product parameters:
Voltage: 3.3~6V
WiFi:802.11b/g/n protocol, 2.4GhHz
Bluetooth :BT 5.0
SPI Flash: built-in 4M
Pin interface: 1xI2C, 1xSPI, 2xUART, 11xGPIO(PWM), 4xADC
Onboard LED blue light: GPIO8 pin
BO0: Download button, long press BO0 key and plug in USB cable, release the hand to enter "download mode"
RST: Reset button to restart or reset the program.
USB interface: can be used as the power supply of the circuit board or the communication interface connecting the PC and the ESP32C3.
Size: 24.8mm*20.45mm
Attention:
1. This document only represents the product cognition and parameters at the time of editing, and is subject to change without prior notice.
2. If an external power supply is required, just connect
.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan