4.6/ 5.0
88% pembeli merasa puas
9 rating • 4 ulasan
5(8)88.89%
4(0)0%
3(0)0%
2(0)0%
1(1)11.11%
Atur jumlah dan catatan
Stok Total: 20
Subtotal
Rp35.000
MH-Tiny ATTINY88 micro development board 16Mhz Arduino Nano Alternatif
Rp35.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: MCU
Alternatif untuk arduino Nano. Menggunakan IC ATTiny88 (16Mhz). Bisa menggunakan Arduino IDE.
Cara pakainya sedikit berbeda dengan arduino Nano biasa. Silahkan cari tutorialnya dulu.
The MH-ET LIVE ATTiny88 (16.0Mhz) microcontroller development board is similar to the Arduino series development board, but it is more cost-effective, smaller and more powerful.
Because it can use the familiar Arduino IDE, MH-ET LIVE Tiny88 is a development board that can quickly get started with DIY electronic products, and can well replace other development boards that are too bulky and complicated to assemble.
MH-ET LIVE ATTiny88 is delivered from the factory except that the included pin headers need to be soldered by the user, other components have been fully assembled, and the soldering is also convenient and simple.
Specifications:
- Support rduino IDE 1.0+ (OSX/Win/Linux) 5v or 7-24v via USB or external power supply (recommended 12v or lower, automatically selected) Onboard 500ma 5V voltage regulator
- Built-in USB 26 I/Os Pins (2 for USB only if your program is actively communicating over USB, otherwise all 26 are available even after you program over USB) 8k Flash (about 6k after bootloader) Onboard I2C and SPI interfaces with 26 PWM pins (software PWM, hardware PWM only two (D9, D10)) with 8 ADC pins Power LED and Test/Status LED Dimensions (mm): 44.5x18.3x3
Cara pakainya sedikit berbeda dengan arduino Nano biasa. Silahkan cari tutorialnya dulu.
The MH-ET LIVE ATTiny88 (16.0Mhz) microcontroller development board is similar to the Arduino series development board, but it is more cost-effective, smaller and more powerful.
Because it can use the familiar Arduino IDE, MH-ET LIVE Tiny88 is a development board that can quickly get started with DIY electronic products, and can well replace other development boards that are too bulky and complicated to assemble.
MH-ET LIVE ATTiny88 is delivered from the factory except that the included pin headers need to be soldered by the user, other components have been fully assembled, and the soldering is also convenient and simple.
Specifications:
- Support rduino IDE 1.0+ (OSX/Win/Linux) 5v or 7-24v via USB or external power supply (recommended 12v or lower, automatically selected) Onboard 500ma 5V voltage regulator
- Built-in USB 26 I/Os Pins (2 for USB only if your program is actively communicating over USB, otherwise all 26 are available even after you program over USB) 8k Flash (about 6k after bootloader) Onboard I2C and SPI interfaces with 26 PWM pins (software PWM, hardware PWM only two (D9, D10)) with 8 ADC pins Power LED and Test/Status LED Dimensions (mm): 44.5x18.3x3
Ada masalah dengan produk ini?