5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 15
Subtotal
Rp50.000
Modul WiFi ESP8285 ESP-M3 ESP M3 Serial Wireless Transceiver
Rp50.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Modul WiFi ESP8285 ESP-M3
What is ESP8285?
ESP8285 = ESP8266 + 1M Flash, so that it can withstand high temperatures up to 125 degrees Celsius! And the original ESP8266 source code program can be used to transplant.
ESP-M3 module core processor using cost-effective chip ESP8285. The chip integrates the enhanced version of the Tensilica's L106 Diamond 32-bit core processor with on-chip SRAM in a smaller package. ESP8285 has a complete Wi-Fi network function, both can be used independently, can also be used as a slave from other host MCU running. When the ESP8285 hosting application, can be started directly from the external Flash. Built-in cache memory facilitates system performance and optimizes storage systems. In addition, ESP8285 only through the SPI/SDIO interface or I2C/UART port can be used as a Wi-Fi adapter, applied to any microcontroller-based design.
fully compatible with ESP8266, the source code can be used to transplant.
SOC characteristics:
Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and 160MHz support RTOS
Built-in TCP/IP protocol stack
Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
The deep sleep hold current is 10uA and the shutdown current is less than 5uA
Wake up within 2 ms, connect and pass the packet
Standby power consumption less than 1.0mW (DTIM3)
Built-in 1M bytes of SPI Flash
Wi-Fi features:
Supports 802.11 b/g/n/e/i
Support Station, SoftAP, SoftAP+STA mode
Support for Wi-Fi Direct (P2P)
Supports CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC hardware acceleration
WPA/WPA2 PSK and WPS
802.11 i security features: pre-authentication and TSN
Hold 802.11n (2.4 GHz)
802.1h/RFC1042 frame encapsulation
Support for Smart Config features (Android)
Operating temperature range: -40 ~ 125
What is ESP8285?
ESP8285 = ESP8266 + 1M Flash, so that it can withstand high temperatures up to 125 degrees Celsius! And the original ESP8266 source code program can be used to transplant.
ESP-M3 module core processor using cost-effective chip ESP8285. The chip integrates the enhanced version of the Tensilica's L106 Diamond 32-bit core processor with on-chip SRAM in a smaller package. ESP8285 has a complete Wi-Fi network function, both can be used independently, can also be used as a slave from other host MCU running. When the ESP8285 hosting application, can be started directly from the external Flash. Built-in cache memory facilitates system performance and optimizes storage systems. In addition, ESP8285 only through the SPI/SDIO interface or I2C/UART port can be used as a Wi-Fi adapter, applied to any microcontroller-based design.
fully compatible with ESP8266, the source code can be used to transplant.
SOC characteristics:
Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and 160MHz support RTOS
Built-in TCP/IP protocol stack
Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
The deep sleep hold current is 10uA and the shutdown current is less than 5uA
Wake up within 2 ms, connect and pass the packet
Standby power consumption less than 1.0mW (DTIM3)
Built-in 1M bytes of SPI Flash
Wi-Fi features:
Supports 802.11 b/g/n/e/i
Support Station, SoftAP, SoftAP+STA mode
Support for Wi-Fi Direct (P2P)
Supports CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC hardware acceleration
WPA/WPA2 PSK and WPS
802.11 i security features: pre-authentication and TSN
Hold 802.11n (2.4 GHz)
802.1h/RFC1042 frame encapsulation
Support for Smart Config features (Android)
Operating temperature range: -40 ~ 125
Ada masalah dengan produk ini?