45W/70W SSB Linear HF Power Amplifier 3.5-30Mhz DIY Kits For YAESU FT-817 KX3 SMD Part Soldered Radio Transceiver Speaker Module

1005002362165650

Selamat Datang Di Toko Kami
Semua Barang PreOrder 15-30 Hari
Selamat Belanja

Specifications
Package
SOP
is_customized
Yes
Model Number
SSB Linear Amplifier
Dissipation Power
SSB Linear Amplifier
Supply Voltage
70W
Application
MP3/MP4 Player
Type
Drive IC
Origin
Mainland China
Condition
New
Operating Temperature
SSB Linear Amplifier


70W SSB Linear Amplifier Board

Description:
Brand New
DIY kits 70W SSB linear HF Power Amplifier
Circuit class AB linear amplifier for SSB AM CW FM power amplifier for low-power radio power connection
Suitable for FT-817 KX3 other small power stations

Electrical parameters:

1. Power supply voltage: 13.8V
2. Current: 6-10A
3. Maximum input power: 5W
4. Maximum output power: 70W
5. Cooled: fan forced cooling
6. Frequency range 3.5--30Mhz (10M - 80M)

WARNING: Output prohibit open, short, prohibit VSWR of 2.0 or more

Note:
1. This is kits, not assembled . without heastink
2. Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.
3. The colors may have different as the difference display, please understand.

Package included:

1* 70W SSB Linear HF Power Amplifier DIY Kits

45W SSB Linear Amplifier Board

Features:
--Common used in SSB, AM linear power amplifier, the CW, FM, power amplifier, and the most basic signal amplification.
--Easy installation and operation.
--Low noise, high cost performance, very suitable for DIY enthusiasts.
--Our product is sent by parts, which not include heat radiator, please help yourself to assemble.
--The overall gain more than 40db, which is 10000 times, 10W input 1mW output.

Specifications:

Input Power: 1-5mW
Output Power: 45W (Max.)
Input Voltage: DC 13.8V 10A or higher
Max. Output Power: 57W (not with cooling fin)
Output Impedance: 50 ohm, can according to need to adjust between 10-200 ohm
Input Frequency Range: 3M-30MHz(HF channel)
Input/Output Interface: Standard SMA interface, external thread hole
PCB Size: 60 * 100 mm
Diameter of Located Hole: 3mm
Color: Green
Package Size: 13 * 8 * 1.5cm
Package Weight: 58g / 2.07oz

Note:

-The following data to test in person, these data sheet is in a large heat sink can withstand 200W above measured, there is not enough cooling capacity, please do not limit, it's not safe.
-The upgrade board test data,so it can be used for all HF Channel,
-In 3 to 5 MHz this period, because of the low frequency, small inductance, lead to the gain has a certain loss, the output power is lower than 7 MHz this point.
3.500MHz 54W
7.050MHz 56W
10.000MHz 57W
14.270MHz 55W
21.400MHz 41W
24.000MHz 37W
28.100MHz 25W
29.600MHz 20W

Package Included:

1* 45W SSB Linear Power Amplifier