FNIRSI DMC-100 AC DC Current Clamp Meter 10000 Counts | Tang Ampere Digital 600A | Digital Multimeter 750VAC | NCV - True RMS

FNIRSI DMC-100 is a 10,000-count high-precision intelligent clamp meter, covering 750V voltage and 600A current ultra-wide range, whether it is engineering maintenance, laboratory research, or vehicle overhaul, home electrical diagnostics, can be easy to handle. Equipped with a 2.0-inch 240 * 320 full-color TFT screen, the new Ul and data curve intuitive presentation, so that readings at a glance. Routine measurement, waveform display, power measurement of the three modes of switching at will, with 3.7V 1500mAh long-lasting battery, lasting battery life. NCV non-contact power measurement, zero fire line identification, temperature -55 ~ 1300 °C wide range of measurement and other powerful features, supplemented by flashlight, screen backlight, data saving and other thoughtful design, Type-C interface to achieve charging and data transmission double convenient. Intelligent automatic shutdown, temperature unit free switching, brightness adjustable, firmware upgradeable, DMC-100, your indispensable electronic maintenance all-round assistant!

Main Specifications of the Device Model: DMC-100 clamp multimeter
Maximum size of jaws: 25mm
Screen: 2.0" TFT color screen
Screen resolution: 240*320 pixels
Battery capacity: 3.7V, 1500mAh battery
Charging specification: USBType-C, 5V/1A
Product weight: 194g
Product size: 193x74x32mm
Measurement parameters
DC voltage: 9.999V/99.99V/999.9V
AC voltage: 9.999V/99.99V/750.OV
DC current/AC current: 99.99A/600.0A
Resistance: 99.99MQ/9.999MQ/999.9K9/99.99KQ/ 9.999KQ/999.99
Capacitance: 9.999mF/99.99mF/999.9MF/99.99MF/9.999MF/
999.9nF/99.99nF/9.999nF
Frequency: 9.999MHz/999.9KHz/99.99KHz/9.999KHz/
999.99H2/99.99Hz/9.999Hz
Temperature: -55~1300°C/-67~2372°F
Diode Measurement: V
On-off test: V
Non-Contact Voltage Check (NCV): V
Zero Fire Wire Check: V

Other Functions
Measuring Mode 1: general measurement
Measuring Mode 2: waveform display
Measuring Mode 3: power measurement
Measurement gear: manual adjustment
Torch: Support
Data Zeroing: Support
Maximum/Minimum Value: Support
Waveform display: Support
Power Calculation: Support
Data Hold: Support
Data Storage and Viewing: Up to 30 groups of data

Language: Chinese/English
Brightness Adjustment: 10-speed adjustment
Temperature unit: °C/°F
Auto Power Off: OFF/5min/15min/30m
Firmware Upgrade: Support

1 x DMC-100 Clamp Multimeter
1 x Multimeter Pen
1 x Temperature Probe
1 x Packing box
1 x Instruction Manual

Mohon foto Label Pengiriman dan sertakan Video Unboxing saat paket diterima (dari awal pembukaan paket sampai selesai) untuk proses klaim jika ada kekurangan atau kecacatan produk (cacat pabrik).

SELAMAT BERBELANJA