5.0/ 5.0
100% pembeli merasa puas
1 rating • 0 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp250.000
Kyowa CC-33A - Strain Gage Adhesive / Cement / Lem Straingage CC33A
Rp250.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
SPECIFICATIONS:
Type: Instantaneous adhesive cured at normal temperatures
FEATURES:
➤ Suitable for bonding general-purpose gages, such as KFG and KFR, which are used for general stress measurement at normal temperatures of 20 to 80.
➤ Quick curing time and stable bonding of various materials in a wide range of temperature and humidity ranges.
➤ Quick curing ensures smooth bonding works.
➤ Enables measurement in approximately 1hour from bonding.
Curing requirements Apply finger pressure (100 to 300 kPa) for 15 to 60 seconds. Then, leave the gage as it is for 1 hour. The finger pressure application time differs depending on temperature and humidity conditions. The lower the temperature and humidity, the longer the finger pressure application time required.
➤ Operating temperature range: -196 to 120 deg C
➤ Ingredients: 1 type of cyanoacrylate liquid
➤ Content: 2g x 1 tube
MAJOR APPLICABLE MATERIALS:
➤ Metals (Steel, stainless steel, copper, aluminum alloys A1050/A2024, etc.)
➤ Plastics (acrylate, vinyl chloride, nylon, etc.)
➤ Composite materials (CFRP, GFRP, printed board, etc.)
➤ Rubber
MAJOR APPLICABLE GAGES:
➤ KFGS, KFGT, KFR, KFWB, KFWS, KFRP, KFRS, KFP, KSPB, KSN (Excl. E5), KSPH, KSPL, KFL, KFN, KFS, KFF, KCH, KV
Type: Instantaneous adhesive cured at normal temperatures
FEATURES:
➤ Suitable for bonding general-purpose gages, such as KFG and KFR, which are used for general stress measurement at normal temperatures of 20 to 80.
➤ Quick curing time and stable bonding of various materials in a wide range of temperature and humidity ranges.
➤ Quick curing ensures smooth bonding works.
➤ Enables measurement in approximately 1hour from bonding.
Curing requirements Apply finger pressure (100 to 300 kPa) for 15 to 60 seconds. Then, leave the gage as it is for 1 hour. The finger pressure application time differs depending on temperature and humidity conditions. The lower the temperature and humidity, the longer the finger pressure application time required.
➤ Operating temperature range: -196 to 120 deg C
➤ Ingredients: 1 type of cyanoacrylate liquid
➤ Content: 2g x 1 tube
MAJOR APPLICABLE MATERIALS:
➤ Metals (Steel, stainless steel, copper, aluminum alloys A1050/A2024, etc.)
➤ Plastics (acrylate, vinyl chloride, nylon, etc.)
➤ Composite materials (CFRP, GFRP, printed board, etc.)
➤ Rubber
MAJOR APPLICABLE GAGES:
➤ KFGS, KFGT, KFR, KFWB, KFWS, KFRP, KFRS, KFP, KSPB, KSN (Excl. E5), KSPH, KSPL, KFL, KFN, KFS, KFF, KCH, KV
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan