Behringer CLOCKED SEQUENTIAL CONTROL MODULE 1027 for Eurorack

The first 2500 series synth modules came out in the 70's and tended to be extremely expensive. They were mainly all discrete transistor designs with some op-amps as at the time op-amps were high cost. The discrete circuitry gave the modules a very distinctive sound and were used by artists like The Who, Jean Michel Jarre, Vangelis, Kraftwerk and so many more, giving us some of the greatest records and film soundtracks we’ve ever heard. Modular synths were a landmark development in electronic music and today, it’s about to get better.

Classic 1027 clocked sequential controller module from the '70s

Authentic reproduction of the circuitry from the "2500" Series

Contains an integrated circuit 8-step counter and 3 channels (A, B and C) of control voltages

8 rows of 3 controls provide 3 independently adjustable voltage outputs for each step of the counter

Built-in time base generator allows the sequencer to step automatically

Each row has an adjacent LED indicator to display the sequencer count

Illuminated push button is used to start and stop the internal clock

Rate of the internal clock can be adjusted from a stepping rate of 20 per minute to 400 per second by adjusting the Pulse Repetition Frequency control and the external rate control signal

Internal clock can be turned on and off by applying pulses on the appropriate input connections

Clock pulse width and duration of the step voltages is adjusted from 0 to 100% by the Pulse Width control and the external width control signal

With the clock turned off the sequencer may be stepped along and reset manually using the front panel push buttons

Control voltages on channel A, B and C range between 0 to 10 V

The 1027 can be used to control other 2500 Series modules including the 1026 Preset Voltages or 1050 Mix Sequencer modules

Cable connections are provided on the rear of the PCB for this purpose (cable included)

Eurorack specs: 26 HP, 50 mA +12 V