Terlaris! New! G-Penny 1.5k ER16 D=65mm Air Cooled Spindle Motor 220v Wood Working and 1.5kw Motor S

Selamat datang di toko kami, produk kami import dr luar negeri kami membutuhkan waktu 20-30hr pengiriman, silahkan diorder kak!!

Brand Name : G-PENNY MACHINE
Origin : Mainland China
Certification : CE
Hign-concerned Chemical : none


1 pcs &1.5kw ER16 D=65 Air Cooled Spindle Motor Engraving Milling Grinding65x258mm 4pcs Bearings

1 pcs &1.5KW QL Inverter

1 pcs &65mm Bracket

Basic parameter:

Size:

65x258mm (Body diameter:65mm; Length:258mm)

Speed Ways:

Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.

Cooling:

Air cooling

Power Interface:

Optional H17-4 pinswaterproof air plug. Theair plug marked "1 ","2"," 3","4", "1 ","2 ","3" were connected to inverter(U, V, W), 4 connected inverter ground.

(Pay attention! our spindle "4" connecting to GND,promised personal safety!!)

Power:

1.5kw(1HP=0.735kw)

Voltage:

110v/220v/380v

Frequency:

0-400Hz

Speed:

0-24000rpm

Runout Off:

0.01mm

4pcs full sealed P4 angular contact ballbearings

Bearing Type:

27004P4 DT&2 7000P4 DT

Air Cooling ER16 collet chunk

Clip Knife diameter: 10mm,9mm,8mm,7mm,6.35mm,6mm,5mm,4mm,3.175mm,3mm,2mm,1mm

Grease Lubrication

Main Application:

Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal,also can engrave on gold,silver,copper,aluminium,Pb etc soft metal surface working.

(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel.If you need steel working,please check the metal spindle,thank you!)

tage:

P4 angular contact ball bearings,27004P4 DT&27000P4 DT,increase spindle life.

Air plug pin-4 connect to spin