Atur jumlah dan catatan
Stok Total: 56
Subtotal
Rp449.000
285- 868MHz 4 Keys Wireless RF Remote Control 433 MHz for Electric Gate Garage Door Opener Controller Transmitter 315mhz
Rp449.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Use range:
The copyable chip model has a learning range:
1. HT-12E, 2. AX5326-3, 3. AX5326-4, 4. AX5026, 5. PT2262, 6. PT2242, 7. HT600, 8. HT680, 9. HT6207, 10. HT6010, 11. HT6012 12. HT6014, 13. MC145026, 14. HT640, 15.EV1527, 16.527, 17.PT2260, 18.SMC918, 19.SMC926, 20.HT12D, 21.PT2240B
Duplication and regeneration of wireless remote controls for barriers, garage doors, etc.
The scope of application of copy remote control:
Ordinary fixed code (chip type 2260, 2262, 2264), learning code (1527, 2240) remote control.
technical parameter:
Product name: Multi-frequency four-button copy remote control
Working voltage: 6V
Encoding type: copy, copy
Working frequency: multi-frequency 250-868MHZ
Number of keys: four keys
Product size: 62*37*14MM
Operation method:
1. Code pairing
Place the original remote control and the copy remote control as close as possible, first press a button of the original remote control, and immediately after the indicator light turns on, press and hold a button of the self-copy remote control for about three seconds, the LED will flash 3 times and then quickly Flashing, it means that the address code of the original remote control button has been learned successfully. The other keys are operated in the same way for learning.
2, clear code
Press the unlock button and the lock button at the same time for 2 seconds, the LED light will start to flash 3 times. At this time, keep the lock button pressed and release the unlock button. Press the unlock button three or four times within 5 seconds, and the indicator light flashes quickly, which indicates The code has been cleared.
Test whether the existing code of the remote control has been successfully cleared: When you finish the clearing action, you can press any button of the copy remote control. If the LED does not flash immediately at this time, it will flash after 2 seconds, that means The original code of the copied remote control has been completely cleared. If the LED still flashes
The copyable chip model has a learning range:
1. HT-12E, 2. AX5326-3, 3. AX5326-4, 4. AX5026, 5. PT2262, 6. PT2242, 7. HT600, 8. HT680, 9. HT6207, 10. HT6010, 11. HT6012 12. HT6014, 13. MC145026, 14. HT640, 15.EV1527, 16.527, 17.PT2260, 18.SMC918, 19.SMC926, 20.HT12D, 21.PT2240B
Duplication and regeneration of wireless remote controls for barriers, garage doors, etc.
The scope of application of copy remote control:
Ordinary fixed code (chip type 2260, 2262, 2264), learning code (1527, 2240) remote control.
technical parameter:
Product name: Multi-frequency four-button copy remote control
Working voltage: 6V
Encoding type: copy, copy
Working frequency: multi-frequency 250-868MHZ
Number of keys: four keys
Product size: 62*37*14MM
Operation method:
1. Code pairing
Place the original remote control and the copy remote control as close as possible, first press a button of the original remote control, and immediately after the indicator light turns on, press and hold a button of the self-copy remote control for about three seconds, the LED will flash 3 times and then quickly Flashing, it means that the address code of the original remote control button has been learned successfully. The other keys are operated in the same way for learning.
2, clear code
Press the unlock button and the lock button at the same time for 2 seconds, the LED light will start to flash 3 times. At this time, keep the lock button pressed and release the unlock button. Press the unlock button three or four times within 5 seconds, and the indicator light flashes quickly, which indicates The code has been cleared.
Test whether the existing code of the remote control has been successfully cleared: When you finish the clearing action, you can press any button of the copy remote control. If the LED does not flash immediately at this time, it will flash after 2 seconds, that means The original code of the copied remote control has been completely cleared. If the LED still flashes
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan