SSD Copper Heatsink Rust-proof Cooling Thermal Pad Antioxidant Copper Heatsink Thermal Pad Polished for Steam Deck Game Consoles

Welcome To Our Store
Kami Adalah Sumber Tangan Pertama, Penjualan Skala Besar, Harga Eceran Sama Dengan Harga Grosir

Brand Name : APWIKOGER
Model Number : Solid State Drive Heatsink
Origin : Mainland China
Electric : No
is_customized : No
Accessories Type : Heatsinks
With USB : No
Compatible Brand/Model : steam
Hign-concerned Chemical : None
SSD Copper Cooler : Thermal Silicone Pad


SSD Copper Heatsink Rust-proof Cooling Thermal Pad Antioxidant Copper Heatsink Thermal Pad Polished for Steam Deck Game Consoles

Feature:

1. High Thermal Conductivity Copper Material:
This solid state drive heatsink is made of pure copper material. This material is not only very durable, but it also has a high thermal conductivity. At the same time, it dissipates heat more quickly by exchanging heat with air contact.

2. Precise Dimension:
This SSD copper heatsink uses precise dimension. It prevents installation deviation and short circuit. In addition, it fits into smaller mounting spaces, such as for Steam Deck M.2 2230 SSD.

3. Chemically Polished:
This cooling thermal pad is chemically polished. Its surface is smooth and burr-free. This prevents short circuits. It also resists rust as well as oxidation. It has a very long life span.

4. Mini and Portable:
This copper heatsink thermal pad is very mini and light. it is portable and convenient to use. whether you can carry it in your pocket. Whether you can carry it in your pocket, handbags or backpacks, it will not take up too much space and add pressure to you. let your daily gaming and life more efficient.

5. 0. 5mm Thermal Conductive Silicon and 0. 13mm Phase Change Heat Sink:
This SSD copper cooler also comes with a 0.5mm Thermal Conductive Silicon, 0.13mm Photo Variable Heat Sink and a screw tool kit. This allows the heatsink to work better. Also, your installation will be more convenient and easier.

Specification:

Origin: Mainland China

Compatible Brand/Model: STEAM

Model Number: Solid State Drive Heatsink

Accessories Type: Heatsinks

Material: silicon wafer, copper, metal, etc.

Size: 26x23mm

Weight: 15g

Hard disk cooling installation tutorial:

1. Turn the STEAM DECK off. Turn off the power to STEAM DECK and unplug all cables before replacing the hard drive.

2. Remove the eight screws on the back of the STEAM DECK. (1) Use a Phillips screwdriver to remove the eight screws securing the back cover. four 9.5 MM screws and four 5.8 MM screws; (2) Keep the screws safe during the replacement process to prevent loss

3. pry open the back cover. (1)
Insert a tab along the edge of the right grip in the slit between the back cover and the front case; (2) Use the tab to pry up the back cover to loosen the clips

4. Remove the protective plate. (1) use a Phillips screwdriver to unscrew the three screws holding the shield, one 3.4mm screw and two 3.7mm screws; (2) remove the screws and remove the shield

5. Remove the SSD. (1) screw out the fixed SSD screws with a Phillips screwdriver; (2) remove the fixed screws and pull out the hard drive

6. Install the heatsink (1) peel off the heatsink protective film; (2) peel off the thermal paste protective film to thermal paste, as shown in the picture on the surface of the hard disk particles; (3) align the heatsink to the hard disk and press into the thermal slot

7. Install the solid state drive. Insert the SSD with the heatsink installed back into the slot and tighten the screws

8. Put back the protective cover. After installing the hard drive, align the protective cover with the body screw holes and put it back on

9. Install the protective cover. Put back the three fixing screws to fix the protective cover

10. Install the eight screws on the back of the STEAM DECK. (1) Snap the back cover into the body; (2) Install the body screws to fix the back cover, installation is complete

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

1 x Copper Heat Sink

2pcs x 0.5mm Thermally Conductive Silicone

2pcs x 0.13mm Vario Heat Sink

1 x Screwdriver

2pcs x M2 Screws

1 x Warp

Contact Us Before Order
#Sebelum membeli suatu produk, Mohon dapat membaca deskripsi produk dengan cermat
#Harap tanyakan stok sebelum melakukan pemesanan ya kak
#Jika Anda memiliki pertanyaan, silakan hubungi kami.