5.0/ 5.0
100% pembeli merasa puas
37 rating • 7 ulasan
5(36)97.3%
4(1)2.7%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 101
Subtotal
Rp31.000
Attiny88 Attiny 88 MH-Tiny Pengganti Arduino Nano V3 Replacement
Rp31.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: MODUL
Untuk mengatifkan Attiny88 di arduino IDE
ikuti cara dibawah ini
Compatible dengan Arduino IDE
Tutorial: https://robojax.com/learn/arduino/?vid=robojax_MH-Tinny_Tinny88
Library : https://github.com/MHEtLive/MHEtLiveArduino
Datasheets : http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-9157-automotive-microcontrollers-attiny88_datasheet.pdf
http://www.getmicros.net/mh-et-live-tiny88-an-arduino-compatible-development-board.php
https://store.ichibot.id/product/mh-tiny-attiny88-micro-development-board-16mhz-digispark-at-tiny-88/
ATTiny88 (16.0 mhz) based microcontroller development board similar to the Arduino series, only cheaper, smaller, and a bit less powerful. Compatible with arduino IDE.
Support for the Arduino IDE 1.0 + (OSX / Win / Linux)
Power supply over USB or External Source-5v or 7-35v (12v or less recommended, automatic selection)
On-board 500ma 5v regulator
Built-in USB
26CH I/O Pins (2 are used for USB only if your program actively communicates via USB, otherwise you can use all if you are programming via USB)
8k Flash Memory (over 6k after bootloader)
I2C and SPI
26-PWM (26 pins with software PWM, only two (D9, D10) with hardware PWM)
ADC on 8 pins
Power LED and test / status LED
Size (mm): 44.5×18.3×3
ikuti cara dibawah ini
Compatible dengan Arduino IDE
Tutorial: https://robojax.com/learn/arduino/?vid=robojax_MH-Tinny_Tinny88
Library : https://github.com/MHEtLive/MHEtLiveArduino
Datasheets : http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-9157-automotive-microcontrollers-attiny88_datasheet.pdf
http://www.getmicros.net/mh-et-live-tiny88-an-arduino-compatible-development-board.php
https://store.ichibot.id/product/mh-tiny-attiny88-micro-development-board-16mhz-digispark-at-tiny-88/
ATTiny88 (16.0 mhz) based microcontroller development board similar to the Arduino series, only cheaper, smaller, and a bit less powerful. Compatible with arduino IDE.
Support for the Arduino IDE 1.0 + (OSX / Win / Linux)
Power supply over USB or External Source-5v or 7-35v (12v or less recommended, automatic selection)
On-board 500ma 5v regulator
Built-in USB
26CH I/O Pins (2 are used for USB only if your program actively communicates via USB, otherwise you can use all if you are programming via USB)
8k Flash Memory (over 6k after bootloader)
I2C and SPI
26-PWM (26 pins with software PWM, only two (D9, D10) with hardware PWM)
ADC on 8 pins
Power LED and test / status LED
Size (mm): 44.5×18.3×3
Ada masalah dengan produk ini?