Atur jumlah dan catatan
Stok Total: 30
Subtotal
Rp11.000
Micro SD Card Reader Writer Module For Arduino Modul Pembaca MicroSD
Rp11.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Aplikasi:
data logger, file reader writer, external memorry support, sound player
Spesifikasi:
Supply voltage: 4.5V(min), 5V(typical), 5.5V(max)
Current: 0.2mA(min), 80mA(typical), 200mA(max)
Level conversion circuit board can interface: 5V or 3.3V
Card supported: Micro SD card (up to 2GB),Micro SDHC card (up to 32G)
Size: approx. 42 x 25 x 12mm
Weight: approx. 5g
Control Interface: Six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is power supply, MISO, MOSI, SCK is SPI bus, CS is chip selecting signal pin
3.3V voltage regulator circuit: LDO regulator output 3.3V
Level conversion circuit: signal of Micro SD card direction into 3.3V, MISO signal which controls interface direction is also converted to 3.3V. general AVR microcontroller system can read the signal;
Micro SD card connector: self-spring socket, easy to insertion and removal card
Positioning holes: 4pcs 2mm diameter M2 screws hole, good for installing positioning, to achieve inter-module combination
2106149.C1
data logger, file reader writer, external memorry support, sound player
Spesifikasi:
Supply voltage: 4.5V(min), 5V(typical), 5.5V(max)
Current: 0.2mA(min), 80mA(typical), 200mA(max)
Level conversion circuit board can interface: 5V or 3.3V
Card supported: Micro SD card (up to 2GB),Micro SDHC card (up to 32G)
Size: approx. 42 x 25 x 12mm
Weight: approx. 5g
Control Interface: Six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is power supply, MISO, MOSI, SCK is SPI bus, CS is chip selecting signal pin
3.3V voltage regulator circuit: LDO regulator output 3.3V
Level conversion circuit: signal of Micro SD card direction into 3.3V, MISO signal which controls interface direction is also converted to 3.3V. general AVR microcontroller system can read the signal;
Micro SD card connector: self-spring socket, easy to insertion and removal card
Positioning holes: 4pcs 2mm diameter M2 screws hole, good for installing positioning, to achieve inter-module combination
2106149.C1
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan