Raspberry Pi CM4 Wireless 4G RAM Lite (no eMMC) and Kits - CM4 Board Only

Features and Spec CM4 Wireless, 4GB RAM, Lite (no eMMC):
 
"Lite, no onboard eMMC, will require external microSD with a compatible Operating System to boot"
 
Processor: Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
Model: CM4104000
H.265 (HEVC) (up to 4kp60 decode), H.264 (up to 1080p60 decode, 1080p30 encode)
OpenGL ES 3.0 graphics
4GB LPDDR4-3200 SDRAM
Lite, no onboard eMMC, will require external microSD with a compatible Operating System to boot
built-in Fully certified radio module with :
Dual-band WiFi: 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac wireless
Bluetooth 5.0, BLE
Onboard electronic switch to select between external or PCB trace antenna
Gigabit Ethernet PHY supporting IEEE 1588
1 x PCIe 1-lane Host, Gen 2 ( 5Gbps )
1 x USB 2.0 port ( highspeed )
28 x user GPIO supporting either 3.3V or 1.8V signaling and various interface options:
Up to 6 x UART
Up to 6 x I2C
Up to 5 x SPI
1 x SDIO interface
1 x DPI (Parallel RGB Display)
1 x PCM
Up to 2 x PWM channels
Up to 3 x GPCLK outputs
2 x HDMI 2.0 ports (up to 4kp60 supported)
MIPI DSI:
1 x 2-lane MIPI DSI display port
1 x 4-lane MIPI DSI display port
MIPI CSI-2:
1 x 2-lane MIPI CSI camera port
1 x 4-lane MIPI DSI camera port
1 x SDIO 2.0 (CM4Lite only)
Single +5VDC Power Supply Unit input
Small Footprint 55mm x 40mm x 4.7mm with 4 x M2.5 mounting holes