16CH-5V
Atur jumlah dan catatan
Stok: 30
Subtotal
Rp120.800
16 Channel 5V / 12V / 24V Relay Module LM2596 With Optocoupler Protection Low Level Trigger Arduino IOT - 16CH-5V
Rp120.800
Pilih variant: 16CH-5V
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Application:
1. Relay contact capacity 10A 250V with optocoupler protection. The onboard power supply module does not require an external power supply. The I/O port drive is active low.
2. Can be used as a microcontroller development board, can be used as home appliance control, can also be used as PLC expansion output.
Features:
1. Control signal voltage range: The trigger signal is low level 0-2V.
2. Adopting high quality isolated optocoupler, it has strong anti-interference ability and stable performance, the trigger current only needs 3mA.
3. 1-16 channels can be turned on/off at will, or any way.
4. Output form: Directly connected to AC 220V 10A or DC30V 10A load.
5. Each relay common terminal COM is independent, which is convenient for users to access different signals. Each relay has a normally closed and normally open port.
6. Each relay has an action indicator, which is illuminated and turned off.
7. The interface design is user-friendly, and all interfaces can be directly connected through the terminal block, which is very convenient.
8. There are 4 fixing bolt holes for easy installation.
9. PCB board size: 180 x 90 x 20mm (L x W x H)
Electrical parameters:
Supply voltage: 5V / 12V / 24V (DC)
Supply current: Greater than 200mA
Each relay can be loaded: 250V 10A (AC) or 30V 10A (DC)
1. Relay contact capacity 10A 250V with optocoupler protection. The onboard power supply module does not require an external power supply. The I/O port drive is active low.
2. Can be used as a microcontroller development board, can be used as home appliance control, can also be used as PLC expansion output.
Features:
1. Control signal voltage range: The trigger signal is low level 0-2V.
2. Adopting high quality isolated optocoupler, it has strong anti-interference ability and stable performance, the trigger current only needs 3mA.
3. 1-16 channels can be turned on/off at will, or any way.
4. Output form: Directly connected to AC 220V 10A or DC30V 10A load.
5. Each relay common terminal COM is independent, which is convenient for users to access different signals. Each relay has a normally closed and normally open port.
6. Each relay has an action indicator, which is illuminated and turned off.
7. The interface design is user-friendly, and all interfaces can be directly connected through the terminal block, which is very convenient.
8. There are 4 fixing bolt holes for easy installation.
9. PCB board size: 180 x 90 x 20mm (L x W x H)
Electrical parameters:
Supply voltage: 5V / 12V / 24V (DC)
Supply current: Greater than 200mA
Each relay can be loaded: 250V 10A (AC) or 30V 10A (DC)
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan