Atur jumlah dan catatan
Stok Total: 15
Subtotal
Rp24.500
HW-685 - 4-20MA Current to Voltage Module 0/4-20mA to 0-3.3V 5V 10V
Rp24.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
HW-685 4-20MA TO 3.3V5V10V VOLTAGE TRANSMITTER SIGNAL CONVERSION AND CONDITIONING CURRENT TO VOLTAGE MODULE
Description:
In the process of circuit signal transmission, the voltage signal will weaken with the increase of the transmission distance, and the current transmission can avoid the weakening of the signal. The module is used for the end of current signal transmission, the signal is converted into voltage signal for SCM detection. The current input supports 4-20mA and 0-20mA, and the voltage output supports 0-3.3V 0-5V 0-10V.
Instruction:
1. The module is connected according to the definition, the supply voltage is 7-36V (if the output is to 10V, the supply voltage must be greater than 12V)
2. After power on, the D2 light should be bright, otherwise please check the line connection. Board with reverse connection protection, reverse connection not burning.
3. When the current input is minimum (0mA or 4mA), adjust the ZERO potentiometer, so that the output of VOUT is minimum (0.0V or other voltage)
4. When the current input is the maximum (20mA), adjust the SPAN potentiometer, so that the VOUT output is the maximum value (3.3V or 5V or 10V, when the input is 4-20mA, the minimum output can be 2.5V).
According to your needs, select the corresponding range by jumper cap:
4–20ma:
0–2.5V range: J1 1, 2 feet short connection, 3, 4 feet short connection
0–3.3V range: J1 1, 2 feet off, 3, 4 feet off
0–5.0V range: J1 1, 2 feet short connection, 3, 4 feet short connection
0–10.0V range: J1 1, 2 feet short connection, 3, 4 feet off
0–20ma:
0–3.3V range: J1 1, 2 feet short connection, 3, 4 feet short connection
0–5.0V range: J1 1, 2 feet short connection, 3, 4 feet short connection
0–10.0V range: J1 1, 2 feet short connection, 3, 4 feet off
Package Included:
1 x Current to Voltage 0/4-20mA to 0 -10V Transmitter Module
Description:
In the process of circuit signal transmission, the voltage signal will weaken with the increase of the transmission distance, and the current transmission can avoid the weakening of the signal. The module is used for the end of current signal transmission, the signal is converted into voltage signal for SCM detection. The current input supports 4-20mA and 0-20mA, and the voltage output supports 0-3.3V 0-5V 0-10V.
Instruction:
1. The module is connected according to the definition, the supply voltage is 7-36V (if the output is to 10V, the supply voltage must be greater than 12V)
2. After power on, the D2 light should be bright, otherwise please check the line connection. Board with reverse connection protection, reverse connection not burning.
3. When the current input is minimum (0mA or 4mA), adjust the ZERO potentiometer, so that the output of VOUT is minimum (0.0V or other voltage)
4. When the current input is the maximum (20mA), adjust the SPAN potentiometer, so that the VOUT output is the maximum value (3.3V or 5V or 10V, when the input is 4-20mA, the minimum output can be 2.5V).
According to your needs, select the corresponding range by jumper cap:
4–20ma:
0–2.5V range: J1 1, 2 feet short connection, 3, 4 feet short connection
0–3.3V range: J1 1, 2 feet off, 3, 4 feet off
0–5.0V range: J1 1, 2 feet short connection, 3, 4 feet short connection
0–10.0V range: J1 1, 2 feet short connection, 3, 4 feet off
0–20ma:
0–3.3V range: J1 1, 2 feet short connection, 3, 4 feet short connection
0–5.0V range: J1 1, 2 feet short connection, 3, 4 feet short connection
0–10.0V range: J1 1, 2 feet short connection, 3, 4 feet off
Package Included:
1 x Current to Voltage 0/4-20mA to 0 -10V Transmitter Module
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan