IK Multimedia iRig Micro Amp Gitar with iOS / USB Audio Interface

Common
Speaker: 1x4 full range
Output power: 15W (DC IN powered) or 7.5W (battery powered)
Power supply
Power: battery power (6xAA - included), or DC power supply (9V-15V DC, from 1500mA up, negative inside - not included)
Battery duration: approx. 15h with 6xAA alakline
DC IN: 9V-15V DC negative inside
USB Interface
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Device Connection: micro-USB
Instrument Input
Connector: unbalanced, Hi-Z, TS 1/4 Jack. Tip: signal / Shield: ground
Instrument Input Level: from 30mVpp to 6.9Vpp
Instrument Input Impedance: 1MOhms
Frequency response: 20 Hz 20kHz +/-1.5dB
Stereo Headphone Output
Connector: 1/8 TRS Jack. Tip: right / Ring: left / Shield: ground
External Speaker Output
Connector: 1/4 TS Jack
Load impedance: from 4 to 16 Ohms
Dimensions and weight
Dimensions: 210mm x 125mm x 155mm
Weight: 1.26kg
Package includes
iRig Micro Amp
Lightning to micro-USB cable 60cm
USB A to micro-USB cable 60 cm
6 x 1.5V AA battery
3/8"-16 male to 5/8"-27 female mic stand thread adapter
Compatibility
iOS Devices
Compatible with iPhone X, iPhone 8 Plus, iPhone 8, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd Generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st Generation), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation. iOS 6 or later is required.

Computers
Mac: macOS 10.6 or later. One free USB port required.

Windows: One free USB port. For low latency, the IK Multimedia's iRig audio driver must be INSTALLED