Atur jumlah dan catatan
Stok Total: Sisa 6
Subtotal
Rp37.890.000
SPL GoldMike Mk2 Premium Dual-Channel Microphone Preamplifier
Rp37.890.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: PREAMP
The GoldMike Mk2 combines Class-A transistor with a tube preamplifier.
The transistor stage is composed of single transistors in a Class A design and works in series with a tube preamplification stage that provides 6dB to 18dB of tube gain for subtle to more obvious saturation effects.
A significant contribution to the GoldMike Mk2 is the preamplifier concept that combines transistor and tube preamplifier stages and specifically utilizes their technological and sonic advantages: The efficiency and low noise of a discrete transistor stage is enriched with musical coloration of a tube stage.
Features
Discrete Class-A single transistor & tube preamps
Tube drive in three different intensity levels
Flair presence enhancement in two switchable settings
Pre-output limiter stage (extremely fast diode-based operation, perfect for A/D converter protection)
Polarity Reversal
48-volt phantom power
VU metering with three different, switchable display ranges
Front panel instrument input, separate rear-side microphone and line inputs
Custom-made, fully discrete, Class A op-amps
VU meters with two switchable calibrations
All switch functions are handled by encapsulated relays with gold-plated contacts.
PCB Layout
Because the GoldMike Mk2 is a dual channel preamplifier, its channel separation is of fundamental importance for the stereo image.
Therefore the print-board layout is symmetrically mirrored around the power supply in the center from channel 1 to channel 2.
This results in an identical signal flow to supporting a naturally balanced stereo image. Additionally the print-board provides extra-large ground areas maximizing the shielding against crosstalk and interference.
Build in
Lundahl I/O transformers.
Options
Options include a 24/192 AD Converter.
The transistor stage is composed of single transistors in a Class A design and works in series with a tube preamplification stage that provides 6dB to 18dB of tube gain for subtle to more obvious saturation effects.
A significant contribution to the GoldMike Mk2 is the preamplifier concept that combines transistor and tube preamplifier stages and specifically utilizes their technological and sonic advantages: The efficiency and low noise of a discrete transistor stage is enriched with musical coloration of a tube stage.
Features
Discrete Class-A single transistor & tube preamps
Tube drive in three different intensity levels
Flair presence enhancement in two switchable settings
Pre-output limiter stage (extremely fast diode-based operation, perfect for A/D converter protection)
Polarity Reversal
48-volt phantom power
VU metering with three different, switchable display ranges
Front panel instrument input, separate rear-side microphone and line inputs
Custom-made, fully discrete, Class A op-amps
VU meters with two switchable calibrations
All switch functions are handled by encapsulated relays with gold-plated contacts.
PCB Layout
Because the GoldMike Mk2 is a dual channel preamplifier, its channel separation is of fundamental importance for the stereo image.
Therefore the print-board layout is symmetrically mirrored around the power supply in the center from channel 1 to channel 2.
This results in an identical signal flow to supporting a naturally balanced stereo image. Additionally the print-board provides extra-large ground areas maximizing the shielding against crosstalk and interference.
Build in
Lundahl I/O transformers.
Options
Options include a 24/192 AD Converter.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan