ImmersionRC PowerPlay FPV DVR Module h264 60fps for FatShark Goggle

A DVR Created Purely for FPV The internal DVR on FatShark Dominator Goggles is ‘ok’, but it doesn’t come close to the quality that PAL/NTSC can offer. Instead of the MJPEG compression used in the Dominator, the PowerPlay uses x264 (AVC) compression, with a much higher bit-rate. The 30fps frame rate of the Dominator is also doubled to 60fps, which is essential for capturing fluid race footage. -Powers FatShark Goggles (with power switch) -h264 Recording, at up to 60fps -Built-in 6cm LCD display, showing recording + playback -USB-C Charging -2x 18500 Cells (Not Included) - Accessories for Head, or Pocket Mounting The Power Part… PowerPlay’s Power section is a pair of two 18500, Li-ion cells, that can power a Dominator H DO + rapidFIRE + DVR for up to 3 hours *. To recharge, either use the built-in USB-C port for up to 1.5A charging, or simply pop out the cells, and replace with a freshly charged set. The PowerPlay ships with 1400mAh cells, but larger capacity 2040mAh cells are available from most vape shops, and are the same ones used in the FrSky X-Lite radios, so any decent FPV retailer will stock them. * 3 hours with 2040mAh cells, not shipped with the product Head Strap The PowerPlay ships with a head-mounting accessory pack. A quick-release clip mounts on the rear of the standard goggle headstrap, and the new included top-strap ensures a comfortable fit. PRODUCT SPECIFICATIONS Power: 2x 18500 Li-ion cells (without protection circuits) Power Switch: Yes… powers both the DVR, and the Goggles Video File Format: h264 (AVC) Video File Resolution: 720×576 (PAL), 720×480 (NTSC) Video Data Rate: ~15Mbps (PAL), ~8Mbps (NTSC) Black Flashy: None INCLUDED ACCESSORIES 1x PowerPlay DVR 1x Head Strap Clip 1x Over-head Strap 1x Replacement fan cover mounting kit w/Strap clip 1x Short DC/AV ‘Y’ cable for head-mounting use (incl. Fan Power) 1x Long DC/AV ‘Y’ cable for pocket use (incl. Fan Power)