NeutronRC AT32F435 12A AIO 2S ELRS RX AM32 Flight Controller FC ESC

About ELRS firmware and passwords: Default firmware 3.2.1, default password: neutronrc Betaflight+AM32 2S 12A: The default is Betaflight 4.5 development version firmware+AM32 2.0.1 firmware. If you need to change the FC firmware, please update the firmware by yourself according to ATF or QUICKSILVER. ESC firmware cannot be updated to AM32 through AM32 ESC Configurator, choose carefully Specification : MCU : AT32F435CGU7, @288MHz, 1MB Flash IMU : BMI270 (SPI1) CW=0, YAW=-45 OSD : AT7456E (SPI2) Blackbox : SPI=2 Flash 16M Baro : Infineon DPS310 (I2C1) 5xUarts (1,2,3,5,7) amp;1x 12C BEC : 5V 2.0A , 12V 2A (DJI O3) FC : ATBETAFLIGHT (NEUTRONRCF435MINI) Support : INAV/QUICKSILVER/Betaflight (Will 4.5) ESC : AM32/ESCape32 Support : AM32/ESCape32(adapting) ELRS : 2.4G (DIY 2400RX ESP8285 SX1280) Current Sensor (Scale 165) amp; Voltage Sensor (Scale 110) 4x LEDs for FC Status amp;3.3V amp;5V and ELRS ESCMCU : AT32F421 120MHz (HF32 Firmware) AOS MOS, low internal resistance and high current Current 12Ax4, Max 13A (5S) 8-layer 20Z, 2-order blind via PCB Target : ATbeatflight Firmware : NEUTRONRCF435MINI INAV Firmware : NEUTRONRCF435MINI QUICKSILVER Firmware : NEUTRONRCF435MINI Mechanical and Electical Specs : Input Voltage : 2S (8.4-8.7V) Mounting : 25.5x25.5mm/M3 Screw hole Size : 31.5x31.5x6mm (USB not included) Weight : 6.6g Default UART Configuration UART 1 : NC UART 2 : NC UART 3 : ELRS 2.4G Recived UART 5 : S.BUS UART 7 : DJI/VISTA