Download Tokopedia App
Tentang TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: 773

Subtotal

Rp1.712.000

News Octoplus FRP Tool OCTOPLUS FRP DONGLE For phones

Rp1.712.000
  • Kondisi: Baru
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
Octoplus FRP Tool allows you to reset Google Factory Reset Protection (FRP) for phones.


SAM Reset FRP operations.
1. “Reset FRP UART (UFS chips)” operation. This operation will not reset/delete device user data.
To perform “Reset FRP UART (UFS chips)” operation, do the following steps:


Put the phone in Download Mode (power off the phone, press and hold "Volume-" + "Home" + "Power ON" buttons) and connect USB cable.
Press “Reset FRP UART (UFS chips)” button.
After Software request disconnect USB cable and connect Samsung Micro UART cable.
Press and hold “Volume-“ + “Power ON” keys for 15-20 seconds, Software will automatically close wizard window and will perform the reset FRP lock.
Done.
2. “Reset FRP ADB (Combination)” operation. This operation will not reset/delete device user data.
To Reset FRP lock using combination firmware, you can try to do the following:


I.


Write "boot.img" partition from appropriate Combination firmware.
Perform "Reset FRP ADB (Combination)" operation in the software.
II.


Write full Combination firmware.
Go to "Developer Options" in the phone’s Settings.
Check "Enable OEM ..." option.
Perform Factory Data Reset.
Reflash the phone with full stock (original) firmware.
Note: "boot.img" from combination firmware can be not compatible with current phone's firmware. In that case phone will freeze on logo, or will be rebooting after writing of such boot. To restore the phone to its initial condition you need to reflash it with different full stock (original) firmware (or try to write only boot of such firmware).


Also note: You can write "boot.img" combination firmware or downgrade phone's firmware version only at your own risk!


P.S. If you cannot find combination firmware for your model in “SAM/COMBINATION" folder in Support Area, this means we don’t have these files at the moment. As soon as we get new combination firmwares, we will upload them into the Support Area.


3. “Reset FRP (Download Mode)” operation. Be careful, performing

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan