Huntron Tracker 2800S

Karena keterbatasan input harga di tokopedia, harga sebenarnya : Rp 110.000.000

The Tracker 2800 and 2800S are “benchtop” Trackers that interface to the PCA under test with test probes or DIP clips and cables. PCA troubleshooting is typically accomplished by comparing signatures of a good board to those of the bad board. These units are lower cost and are a great addition to your troubleshooting arsenal. The Tracker 2800 and 2800S feature variable range parameters resulting in over 100 combinations of voltage, source resistance and frequency.

Features :

● Optional Software Control using Huntron Workstation
● Enhanced Range Selections
● Full Screen Signature Zoom
● Color Touch Screen controls
● Huntron SigAssist built-in
● Built-in DC Voltage Source for testing gated devices (i.e. SCRs, relays, etc.)
● Up to 40 pin scanning with the Tracker 2800S

Specification :
- Waveform : Sine wave
- Number of Voltages plus values : 6 voltages: 200mV, 3V, 5V, 10V, 15V, 20V
- Number of Resistances plus values : 9 resistances: 10Ω, 50Ω, 100Ω, 500Ω, 1kΩ, 5kΩ, 10kΩ, 50kΩ and 100kΩ
- Number of Frequencies plus values : 6 frequencies: 20Hz, 50Hz, 60Hz, 200Hz, 500Hz and 2kHz
- Range Selection : Manual or use Auto Scan; Optional Software control
- Front Panel Connections :Banana jacks for A/B Test channels and Common; A and B 40 pin IDC connectors for cable based scanning (i.e. interface to PCB connectors)
- DC Voltage Source for testing gated devices : Variable voltage from 0 to 10VDC; 200mA max
- Number of Channels : 2 (A and B)
- Display modes : A, B and ALT mode to automatically switch between the A and B channels
- Pins per channel : 40 using a single Common connection
- Scan modes : Manual or automatic (steps through each pin at a speed determined by the rate control)
- DC Voltage Generator : Variable from 0 to +10VDC; Max. current: 100mA
- Display : Color TFT LCD with Touch screen; LED backlight
- Line Voltage : 100/115VAC; 230VAC @ 50/60Hz, 50H