FT232RL FT232 USB UART PCB converter with Data TTL Serial Module AT55

FT232RL FT232 USB UART PCB converter with Data TTL Serial Module AT55

Instructions for use: (taking MCU as an example)
VCCIO: output 3.3V or 5V(Powered by the USB module, to the jumper cap jump to 3.3V or 5V)
GND: connected to the GND
TXD: connected to the MCU.RX (Signal flow: MCU.RX << FT232 << PC.TX )
RXD: connected to the MCU.TX (Signal flow: MCU.TX >> FT232 >> PC.RX )
RTS: connected to the MCU.CTS (Signal flow: MCU.CTS << FT232 << PC.RTS )
CTS: connected to the MCU.RTS (Signal flow: MCU.RTS >> FT232 >> PC.CTS )

NOTE The module is USB to TTL level, do not directly connected to the RS232 level, otherwise it will burn out the module.



Package Included:
FT232 USB UART Board 1
Dupont Line 6