4.8/ 5.0
100% pembeli merasa puas
18 rating • 12 ulasan
5(14)77.78%
4(4)22.22%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Tidak Dijual
Subtotal
-
Raspberry Pi 3 Model B Portable Lithium Battery Power Pack Supply AP77
Rp220.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: ARDUINO RASPPBERY Banana PI Dan FPGA Module
Raspberry Pi 3 Model B Portable Lithium Battery Power Pack Supply AP77
Descriptions
The power pack is designed for the Raspberry Pi 3 Model B specially, allowing its motherboard to work offline up to 9 hours.
Not only for Raspberry Pi,this board has 2 USB-A portsone for supplying power for the Raspberry Pi motherboard and another one for powering the embedded LEDs.
It integrates an imported Li-ion battery charger IC / a booster management chipIt is made in strict accordance with the size of the international Raspberry Pi expansion board HAT,using only a simple cylinder to install multi- layer Raspberry Pi motherboards.
Features
1It can act as a mobile interactive platform when installed with a Raspberry Pi 3.5 LCD screen and a laminated shell.
2.This board can also be installed on the experiment board of Raspberry Pi, allowing your RPi sensor to work offline.
3It can be installed with a 2.2 inch LCD screen and a wireless network card with high sensitivity.
Specifications
Battery capacity: 3800mAH
Maximum discharge current: 1.8A
No-load output voltage : 5.1V 0.1V
Standard charging current / voltage: 1.0A@5.0V
Cut-off voltage of fully charging the Li-ion battery: 4.18V - 4.2V
Functions of CHG LED:
Lighting up: using constant current charging.
Lighting off: using floating charge until the Li-ion battery is fully charged.
Functions of LED:
Lighting up: the USB-A port outputs 5V
Lighting off: the USB-A port outputs no voltage
Package Including
1 x Raspberry Pi Energy shield expansion Board (with Lithium Battery)
4 x Mounting studs, screws, nuts
Descriptions
The power pack is designed for the Raspberry Pi 3 Model B specially, allowing its motherboard to work offline up to 9 hours.
Not only for Raspberry Pi,this board has 2 USB-A portsone for supplying power for the Raspberry Pi motherboard and another one for powering the embedded LEDs.
It integrates an imported Li-ion battery charger IC / a booster management chipIt is made in strict accordance with the size of the international Raspberry Pi expansion board HAT,using only a simple cylinder to install multi- layer Raspberry Pi motherboards.
Features
1It can act as a mobile interactive platform when installed with a Raspberry Pi 3.5 LCD screen and a laminated shell.
2.This board can also be installed on the experiment board of Raspberry Pi, allowing your RPi sensor to work offline.
3It can be installed with a 2.2 inch LCD screen and a wireless network card with high sensitivity.
Specifications
Battery capacity: 3800mAH
Maximum discharge current: 1.8A
No-load output voltage : 5.1V 0.1V
Standard charging current / voltage: 1.0A@5.0V
Cut-off voltage of fully charging the Li-ion battery: 4.18V - 4.2V
Functions of CHG LED:
Lighting up: using constant current charging.
Lighting off: using floating charge until the Li-ion battery is fully charged.
Functions of LED:
Lighting up: the USB-A port outputs 5V
Lighting off: the USB-A port outputs no voltage
Package Including
1 x Raspberry Pi Energy shield expansion Board (with Lithium Battery)
4 x Mounting studs, screws, nuts
Ada masalah dengan produk ini?