pixhawk 2.4.8 p3 px 4 with gps power module damper drone

Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system; Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control; Provide redundant power input and fault transfer function; 14* PWM/ actuator output; Bus interface (UART, I2C, SPI, CAN); Provide automatic and manual mode; Color LED lamp; Multi tone buzzer interface; Micro SD to record flight data; Specification: The board integrates with PX4FMU+PX4IO Pixhawk is with new 32 bit chip and sensor technology Processor: 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit Main frequency: 256K, 168MHZ RAM 32 bit STM32F103 backup co processor Sensor: L3GD20 3 axis digital 16 bit gyroscope LSM303D 3 axis 14 bit accelerometer /magnetometer MPU6000 6 axis accelerometer / magnetometer MS5611 high precision barometer Interface: 5* UART, 1compatible high voltage, 2hardware flow control 2*CAN Spektrum DSM/DSM2/DSM-X satellite receiver compatible input Futaba SBUS compatible input and output PPM signal input RSSI (PWM or voltage) input I2C SPI 3.3 and 6.6VADC input External USB MICRO interface Isi Paket: 1 x 2.4.8 Pixhawk flight controller board with 4G SD with shell 1 x Safety switch 1 x Buzzer 1 x Card Reader 1 x Power Module Line, 1 x PPM/SBUS Line 1 x PPM Encoder 1 x Ublox Neo-7M / M8N GPS 1 x GPS Stand Holder 1 x XT60 Power Module 1 x Shock Absorber