Audio Technica ATM350 ATM 350 - Condenser Instrument Microphone

PERHATIAN ...
-Mohon tanyakan Stok dulu Sebelum Order
-Tokosound Proaudio adalah dealer resmi Audio Technica
-Kami hanya menjual Produk ORIGINAL DAN BERGARANSI RESMI

Audio-Technica ATM350 Features
Low-profile mic design for minimum visibility
Crisp, clear, well-balanced microphone response, even at high SPLs
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
UniMount universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone
Rugged UniMount 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
Interchangeable elements available for hypercardioid and omnidirectional polar patterns
Included violin mount with hook-and-loop fastener provides an additional mounting option

Microphone
Element Fixed-charge back plate permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 40-20,000 Hz
Low Frequency Roll Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity –49 dB (3.5 mV) re 1V at 1 Pa
Maximum Input Sound Level 149 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 122 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 67 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 3.5 mA typical
Switches Flat, roll-off
Weight (Microphone) 14.5 g (0.5 oz)
Weight (Power Module) 81.2 g (2.9 oz)
Weight Microphone: 14.5 g (0.5 oz)
Power module: 81.2 g (2.9 oz)
Cable 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector