Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp23.500.000
Antminer D3 19.3Ghz
Rp23.500.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Mining Hardware
READY STOCK!!! TERBATAS!!! HARGA MASIH BISA NEGO!!!
Barang Ready Antminernya sudah ditest hidup ok semua.
Tinggal Colok kabel dan arahkan walletnya milik agan.
Deskripsi Produk
1. Specifications of the Antminer D3 are as follows:
a) Hash rate: 19.3 GH/s (Variation of 5% is expected)
b) Power consumption: 1200W (at the wall, with Bitmains APW3 PSU, 93% efficiency, 25C ambient temp).
c) Dimensions of the miner: 320*130*190mm
d) Hashing algorithm: X11
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Bitmain recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3.
7. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
8. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.
Barang Ready Antminernya sudah ditest hidup ok semua.
Tinggal Colok kabel dan arahkan walletnya milik agan.
Deskripsi Produk
1. Specifications of the Antminer D3 are as follows:
a) Hash rate: 19.3 GH/s (Variation of 5% is expected)
b) Power consumption: 1200W (at the wall, with Bitmains APW3 PSU, 93% efficiency, 25C ambient temp).
c) Dimensions of the miner: 320*130*190mm
d) Hashing algorithm: X11
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Bitmain recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3.
7. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
8. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan