Michell Easidew Transmitter EA2-TX-IS-100 EA2 TX-100 HD

tomtomstore present : easydewpoint sensor / transmitter dewpoint, sensor untuk membaca tingkat kekeringan uap air dalam udara / kandungan uap air dalam udara dengan suhu tertentu, digunakan untuk aplikasi industri yang membutuhkan udara yang kering, seperti mesin pneumatic, painting, pharmacy, electronic dll range dewpoint : + 20 s/d -100 derajat celcius Two-wire power loop connection Dew point units or ppm moisture content units IP66 (NEMA 4) Excellent sensor protection Range -100 ~ +20°C Operating temperature -40 ~ 60°C Quick response *Technical indicators : performance Dew point range -100 ~ +20°C dew point Dew point accuracy ±2°C dew point Response time T95 is 5 minutes (dry to wet) Repeatability 0,5°C dew point input Output output signal 4-20 mA (two-wire) active output, full scale customizable dew point -100 ~ + 20°C -148 ~ +68°F 0-3000 ppm V ppm V output or non-standard output range must be specified when ordering Bright voltage 12–28V DC Resistive load 250 Ω @ 12 V maximum 500 Ω @ 24 V current consumption 20mA max Power Fluctuation Effects ±0.005% RH/V Working conditions Operating temperature -40 ~ +60°C Working humidity 0–100% RH work pressure up to 45 MPa (450 barg) flow 1 to 5 Nl/min, installed in standard sampling sleeve 0 to 10m/sec, direct insertion Temperature Coefficient Temperature compensation has been made within the operating temperature range Mechanical behavior Sealing protection class IP66 corresponding standard BS EN 60529 : 1992 and NEMA 4 corresponding standard NEMA 250-2003 shell material Stainless steel size L=132mm x ø27mm Mounting Thread 5/8 #34; - 18 UNF weight 150g filter HDPE protective cap 80μm stainless steel protective cap (optional) Electrical connections see table interchangeability Sensors are interchangeable