Atur jumlah dan catatan
Stok Total: 1000
Subtotal
Rp332.100
BIGTREETECH EBB36 EBB42 CAN V1.2 Board Support Canbus PT100 For Klipper Hotend HeadTool 36 stepper motor Ender3 3d Printer Parts
Rp332.100
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Selamat datang di toko kami kak
Barang sesuai gambar dan deskripsi ya kak,Jika kakak mau request ,bisa kakak chat kami atau tulis di note ya,Pastikan request kakak sesuai dengan deksripsi kami ya kakk,jika di deskripsi tidak ada pilihan maka di kirim random ya kak,Happy shoping kakak
Brand Name : BIQU
Model Number : EBB 36 CAN/EBB 42 CAN/U2C
Origin : Mainland China
Item Type : Joining Plate
Hign-concerned Chemical : None
DCDC 5V Maximum Output Current : 1A
EBB
Extruder Breakout Board
Brief Instruction
BIGTREETECH EBB36 CAN / EBB42 CAN
is
a
nozzle adapter board specially designed for
the
36extruder stepper motor, which is launched by
the
3D printing team Shenzhen Big Tree Technology Co., Ltd. It can communicate via USB port, or CAN BUS,greatly simplifying wirings.
ApplicationFor connecting Klipper expansion device
EBB36 CAN
1.1 Features
1.
With BOOT and RESET buttons reserved, users can update the firmware via DFU mode by USB.
2.
Added protection circuit on the thermistor avoids burning the main control chip caused by leakage current from
the
heating rod.
3.
User can select the thermistors pull-up resistors values through jumper wire, so as to support PT1000 (2.2K pull-up resistors), which makes it convenient for DIY.
4.
Connect the USB with
a
jumper cap to get it power on, which effectively isolates the main control board DC-DC from USB 5V.
5.
Reserved I2C interface allows for filament broke and clogged detection, andsupports other DIY functions.
6.
Added anti-flyback diodes on the heating rod and fansports effectively protect the MOS tube from being burned due to reverse voltage.
7.
Anti-reverse connection protection on the power interface prevents users from burning the motherboard when mistakenly connect
ing
the reverse powerduring DIY.
8.
Onboard M
A
X31865 supports selecting 2-wire or 4-wire of PT100/ PT1000.
9.
Supports communication via CAN or USB. The terminal resistor 120R of CAN can be selected through
the
jumper cap, and it reserves CAN expansion interfaces.
10.
Equipped ESD protection chip on the USB port prevents the main control board from being broke
n
down by the static electricity of
the
USB port.
11.
The adaptor board is equipped with terminals, female reeds, double-way studs and screws, which are required for DIY, greatly meeting the DIY needs of customers.
1.2 Parameters
1.
External Dimensions: 51.5mmx 37mm.
2.
Installation Dimensions:hole spacing 43.85mm
,
M3screw hole
x
2
3.
Microprocessor
:
ARM Cortex-M0
STM32F072C8T6 48
MHz
4.
Input Voltage: DC12V-DC24V 6A
5.
Logic Voltage: DC 3.3V
6.
Heating Interface: Heating rod (E0), maximum output current: 5A
7.
Onboard Sensor: ADXL345
8.
Fan Interfaces: two CNC fans
(
FAN0
,
FAN1
)
9.
Maximum Output Current of Fan Interface: 1A, Peak Value 1.5A
10.
Expansion Interfaces:EndStop
,
I2C
,
Probe
,
RGB
,
PT100/PT1000
,
USB interface, CAN Interface
11.
Motor Drive: OnboardTMC2209
12.
DriverWorking Mode: UART
13.
Stepper Motor Interface:EM
14.
Temperature Sensor InterfaceOptional: 1 Channel100K NTCor PT1000
(
TH0
),
1Channel PT100/PT1000
15.
USBCommunication Interface:USB-Type-C
16.
DC 5V Maximum Output Current: 1A
1.3 Firmware
BTT EEB36CAN only supports Klipper at the present.
Introduction of U2C:
BIGTREETECH U2C is a USB to CAN bus module, which can convert the USB port of Raspberry Pi to CAN bus, and connect 3D printing motherboard, BIGTREETECH EBB35/36/42 CAN and other products through CAN bus. There are many different forms of CAN interfaces on the board, which are helpful to connect to different boards.
Features
1.Support CAN bus connection, long data transmission, strong anti-noise
ability, strong real-time performance and high reliability
2. The surface of the PCB adopts the immersion gold process
3. TYPE-C port ESD protection to prevent static electricity from damaging hardware
4. Support firmware update for the master through SWD or hardware DFU
5. Rich CAN interface
Precautions
1.12/24V and GND should not be reversed.
2.When using CAN communication, you need to see which CAN node is used as a terminal. If it is a terminal, you must plug the jumper cap at the 120R position;
Di larang komplain sebelum barang sampai dan tanpa menyertakan video unboxing ya kak
Terima kasih atas perhatiannya kak
Barang sesuai gambar dan deskripsi ya kak,Jika kakak mau request ,bisa kakak chat kami atau tulis di note ya,Pastikan request kakak sesuai dengan deksripsi kami ya kakk,jika di deskripsi tidak ada pilihan maka di kirim random ya kak,Happy shoping kakak
Brand Name : BIQU
Model Number : EBB 36 CAN/EBB 42 CAN/U2C
Origin : Mainland China
Item Type : Joining Plate
Hign-concerned Chemical : None
DCDC 5V Maximum Output Current : 1A
EBB
Extruder Breakout Board
Brief Instruction
BIGTREETECH EBB36 CAN / EBB42 CAN
is
a
nozzle adapter board specially designed for
the
36extruder stepper motor, which is launched by
the
3D printing team Shenzhen Big Tree Technology Co., Ltd. It can communicate via USB port, or CAN BUS,greatly simplifying wirings.
ApplicationFor connecting Klipper expansion device
EBB36 CAN
1.1 Features
1.
With BOOT and RESET buttons reserved, users can update the firmware via DFU mode by USB.
2.
Added protection circuit on the thermistor avoids burning the main control chip caused by leakage current from
the
heating rod.
3.
User can select the thermistors pull-up resistors values through jumper wire, so as to support PT1000 (2.2K pull-up resistors), which makes it convenient for DIY.
4.
Connect the USB with
a
jumper cap to get it power on, which effectively isolates the main control board DC-DC from USB 5V.
5.
Reserved I2C interface allows for filament broke and clogged detection, andsupports other DIY functions.
6.
Added anti-flyback diodes on the heating rod and fansports effectively protect the MOS tube from being burned due to reverse voltage.
7.
Anti-reverse connection protection on the power interface prevents users from burning the motherboard when mistakenly connect
ing
the reverse powerduring DIY.
8.
Onboard M
A
X31865 supports selecting 2-wire or 4-wire of PT100/ PT1000.
9.
Supports communication via CAN or USB. The terminal resistor 120R of CAN can be selected through
the
jumper cap, and it reserves CAN expansion interfaces.
10.
Equipped ESD protection chip on the USB port prevents the main control board from being broke
n
down by the static electricity of
the
USB port.
11.
The adaptor board is equipped with terminals, female reeds, double-way studs and screws, which are required for DIY, greatly meeting the DIY needs of customers.
1.2 Parameters
1.
External Dimensions: 51.5mmx 37mm.
2.
Installation Dimensions:hole spacing 43.85mm
,
M3screw hole
x
2
3.
Microprocessor
:
ARM Cortex-M0
STM32F072C8T6 48
MHz
4.
Input Voltage: DC12V-DC24V 6A
5.
Logic Voltage: DC 3.3V
6.
Heating Interface: Heating rod (E0), maximum output current: 5A
7.
Onboard Sensor: ADXL345
8.
Fan Interfaces: two CNC fans
(
FAN0
,
FAN1
)
9.
Maximum Output Current of Fan Interface: 1A, Peak Value 1.5A
10.
Expansion Interfaces:EndStop
,
I2C
,
Probe
,
RGB
,
PT100/PT1000
,
USB interface, CAN Interface
11.
Motor Drive: OnboardTMC2209
12.
DriverWorking Mode: UART
13.
Stepper Motor Interface:EM
14.
Temperature Sensor InterfaceOptional: 1 Channel100K NTCor PT1000
(
TH0
),
1Channel PT100/PT1000
15.
USBCommunication Interface:USB-Type-C
16.
DC 5V Maximum Output Current: 1A
1.3 Firmware
BTT EEB36CAN only supports Klipper at the present.
Introduction of U2C:
BIGTREETECH U2C is a USB to CAN bus module, which can convert the USB port of Raspberry Pi to CAN bus, and connect 3D printing motherboard, BIGTREETECH EBB35/36/42 CAN and other products through CAN bus. There are many different forms of CAN interfaces on the board, which are helpful to connect to different boards.
Features
1.Support CAN bus connection, long data transmission, strong anti-noise
ability, strong real-time performance and high reliability
2. The surface of the PCB adopts the immersion gold process
3. TYPE-C port ESD protection to prevent static electricity from damaging hardware
4. Support firmware update for the master through SWD or hardware DFU
5. Rich CAN interface
Precautions
1.12/24V and GND should not be reversed.
2.When using CAN communication, you need to see which CAN node is used as a terminal. If it is a terminal, you must plug the jumper cap at the 120R position;
Di larang komplain sebelum barang sampai dan tanpa menyertakan video unboxing ya kak
Terima kasih atas perhatiannya kak
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan