5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 6
Subtotal
Rp94.000
PWM to Voltage Module 0% -100% PWM convert to 0V - 10V
Rp94.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Komponen
PWM to Voltage Module 0% -100% PWM convert to 0V - 10V:
LC PWM turn voltage module LC-LM358-PWM2V can convert PWM digital signal into 0 to 10 v analog signals.Can be used in the PLC or other industrial panel switch signal interfaceBy adjusting the PWM duty ratios to adjust output voltage.Module size is small, easy to apply in different places.
2, Functional Characteristics
MCU embedded technology.
Easy to operate, can pass to fine-tuning potentiometer.
Through the short circuit choose PWM signal input level range.
Module is small, portable and easy to use.
Technical parameters:
Module working voltage: DC 12 v - 30 v.(power requirement: more than 100 mA)
PWM signal receiving frequency range: 1 KHZ - 3 KHZ;
PWM signal input level range:
Fengfeng value of 4.5 V to 10 V level, jump needle at 5 V.The class level signal mainly for conventional industrial control CARDS (e.g., MACH3 boards), 5 v CPU interface;
Fengfeng value between 12 and 24 v level, jump needle at 24 v.The class level signal mainly for conventional PLC interface.
PWM conversion range: 0% - 100% PWM conversion 0 to 10 v
Permissible error: 5%.
3, Introductions
VCC: work power 12 v - 30 v.
GND: working power
PWM: input PWM signal positive pole.
GND: the input signal is negative end.
VOUT: 0 to 10 v output voltage.
GND: output voltage.
LC PWM turn voltage module LC-LM358-PWM2V can convert PWM digital signal into 0 to 10 v analog signals.Can be used in the PLC or other industrial panel switch signal interfaceBy adjusting the PWM duty ratios to adjust output voltage.Module size is small, easy to apply in different places.
2, Functional Characteristics
MCU embedded technology.
Easy to operate, can pass to fine-tuning potentiometer.
Through the short circuit choose PWM signal input level range.
Module is small, portable and easy to use.
Technical parameters:
Module working voltage: DC 12 v - 30 v.(power requirement: more than 100 mA)
PWM signal receiving frequency range: 1 KHZ - 3 KHZ;
PWM signal input level range:
Fengfeng value of 4.5 V to 10 V level, jump needle at 5 V.The class level signal mainly for conventional industrial control CARDS (e.g., MACH3 boards), 5 v CPU interface;
Fengfeng value between 12 and 24 v level, jump needle at 24 v.The class level signal mainly for conventional PLC interface.
PWM conversion range: 0% - 100% PWM conversion 0 to 10 v
Permissible error: 5%.
3, Introductions
VCC: work power 12 v - 30 v.
GND: working power
PWM: input PWM signal positive pole.
GND: the input signal is negative end.
VOUT: 0 to 10 v output voltage.
GND: output voltage.
Ada masalah dengan produk ini?