Ukuran: DIN L48×t48mm Metode tampilan: LED 4 digit 7-segmen Metode kontrol: Kontrol ON/OFF, P, PI, PD, kontrol PID Spesifikasi Input: Thermocouple: K(CA), J(IC), L(IC) , RTD: DPt100Ω, Cu50Ω Siklus sampling: 100ms Output kontrol: Relay (250VAC~ 3A) or SSR drive (12VDC ) [ON/OFF, phase, cycle] Pilihan output: Alarm 1 Catu daya: 100-240VAC~ 50/60Hz Akurasi tampilan_RTD •Pada suhu ruangan (23℃±5℃):(PV ±0.5% or ±1℃, pilih yang paling tinggi) ±1-digit • Suhu luar ruangan:(PV ±0.5% or ±2℃, pilih yang paling tinggi) ±1-digit Akurasi tampilan_Thermocouple •Pada suhu ruangan (23℃±5℃):(PV ±0.5% or ±1℃, pilih yang paling tinggi) ±1-digit • Suhu luar ruangan:(PV ±0.5% or ±2℃, pilih yang paling tinggi) ±1-digit Histeresis (Sensitivitas dapat disesuaikan): 1 to 100℃/℉(0.1 to 50.0℃/℉) variable Pita proporsional: 0.1 to 999.9℃/℉ Waktu integral: 0 ~ 9999 detik Waktu derivatif: 0 ~ 9999 detik Periode kontrol: 0.5 to 120.0 sec Reset manual: 0.0~100.0% Lingkungan_kadar suhu: -10 hingga 50℃, ruangan tertutup: #39;-20 hingga 60℃ Lingkungan_kadar kelembaban: 35 ~ 85%RH, ruang tertutup: 35 ~ 85%RH Tipe insulasi Double insulation or reinforced insulation(mark: , Dielectric strength between the measuring input part and the power part: AC power 2kV, AC/DC Power 1kV) ※In case of the AC voltage model, SSR drive output method (standard ON/OFF control, cycle, control, phase control) is available to select. ※Display accuracy: Thermocouple L(IC) type, RTD Cu50Ω •At room temperature (23℃ ±5℃): (PV ±0.5% or ±2℃, select the higher one) ±1-digit •Out of room temperature range: (PV ±0.5% or ±3℃, select the higher one) ±1digit In case of TC4SP Series, ±1℃ will be added. ※Environment resistance is rated at no freezing or condensation.