Promo Sensor Accelerometer Gyroscope Magnetometer MPU-9250

Modul MPU-9250 GY-9250 ini memiliki multi chip sehingga dapat berfungsi untuk accelerometer, gyroscope, dan magnetometer - Auxiliary master I2C bus for reading data from external sensors (e.g. pressure sensor) - 3.5mA operating current when all 9 motion sensing axes and the DMP are enabled - VDD supply voltage range of 2.4 – 3.6V - VDDIO reference voltage for auxiliary I2C devices - Smallest and thinnest QFN package for portable devices: 3x3x1mm - Minimal cross-axis sensitivity between the accelerometer, gyroscope and magnetometer axes - 512 byte FIFO buffer enables the applications processor to read the data in bursts - Digital-output temperature sensor User-programmable digital filters for gyroscope, accelerometer, and temp sensor - g shock tolerant - 400kHz Fast Mode I2C for communicating with all registers - 1MHz SPI serial interface for communicating with all registers Gyroscope Features : - Digital-output X-, Y-, and Z-Axis angular rate sensors (gyroscopes) with a user-programmable full scale range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADCs - Digitally-programmable low-pass filter - Gyroscope operating current: 3.2mA - Sleep mode current: 8µA - Factory calibrated sensitivity scale factor - Self-test Accelerometer Features : - Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and±16g and integrated 16-bit ADCs - Accelerometer normal operating current: 450µA - Low power accelerometer mode current: 8.4µA at 0.98Hz, 19.8µA at 31.25Hz - Sleep mode current: 8µA - User-programmable interrupts - Wake-on-motion interrupt for low power operation of applications processor - Self-test Magnetometer Features - 3-axis silicon monolithic Hall-effect magnetic sensor with magnetic concentrator - Wide dynamic measurement range and high resolution with lower current consumption - Output data resolution of 14 b SKU : 3131/1561956497111859200/55