Hunst Myjg-40W Co2 Laser Power Supply 110V/220V Laser Generator For

Selamat Datang di Toko Kami. - Kami Menjual Produk-produk Import - Produk Dikirim dari Luar Negeri. - Estimasi Kiriman 5-15 Hari. Mohon Menunggu Model Number : MYJG-40W Certification : CE 1. It has good compatibility and can be applied to laser tubes from many manufacturers. 2. The response speed is fast, and the engraving and cutting effect is good. 3. Significantly delay the life of the laser. 4. The control is simple, you can choose high or low level control, you can input 0-5V analog signal to control the size of the laser power, and you can use PWM signal to control. At the same time, a protection switch is added. 5. The power supply itself has an open-circuit protection function. Under the condition of good protective grounding, the power supply can work in an open-circuit state for a short time, which can avoid the damage of the laser power supply caused by the burst of the laser tube, thereby improving the life of the power supply. 6. Added manual test switch, which can test whether the laser power supply is normal. 7. Each power supply will undergo a 12-hour aging test at a high temperature of 60 under full load, and the power supply will be turned on and off fortimes in 7 seconds. 1. Reliable Quality Performance: Our 40W laser power supplies offer superior performance, high efficiency and fast response time. Extend lifespan and get the most out of your Laser tube with our safe, stable and powerful power supply. 2. Simple installation: each connection port is clearly marked, which is convenient and quick to install. 3. Wide range of applications: Our 40W laser power supply is compatible with most 50W and below (K40) engraving machines and laser tubes on the market, allowing you to continue engraving, sealing and cutting, etc.! 4. Easy control 110V/220V Optional: The power supply also has a physical test button for fault detection, allowing you to troubleshoot easily. Dongguan Hunst Laser Technology Co., Ltd. was founded in 2008,