Atur jumlah dan catatan
Stok Total: 999
Subtotal
Rp8.308.000
READY !! Oscilloscope HANTEK DSO5102P Digital Storage DSO-5102P 100MHz 2 ch Osciloscope
Rp8.308.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Catalog
- Dikirim dari Jakarta
- Garansi distributor
The Hantek DSO5102P provides you with excellent performance in a compact design. It's loaded with standard features including USB connectivity, automated measurements, limit testing, data loading, and context-sensitive measurement that allow this digital storage oscilloscope to help you get more done in less time.
Hantek DSO5102P Specifications
100MHz bandwidth
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800x480)
Record length up to 40K
USB host and device connectivity, standard (note: USB port is NOT intended to be used to recharge cell phones & other usb charged devices. )
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
Acquisition modes: normal, peak detect, average
Inputs coupling: AC, DC, GND
Inputs impedance: 1MΩ±2% ‖ 20pF±3pF
Probe attenuation: 1X, 10X
Maximum input voltage: CAT I and CAT II: 300VRMS (10×), Installation Category CAT III: 150VRMS (1×) Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.
Waveform interpolation: (sin x)/x
Sample rate and delay time accuracy: ±50ppm(at over any ≥1ms time interval)
Position range: 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s
Rise time at BNC: 3.5ns
Math: +, -, *, /, FFT
FFT windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman, 1024 sample point
Bandwidth limit: 20MHz
Low frequency response: (-3db) >≤10Hz at BNC
DC gain accuracy: ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
DC measurement accuracy: When vertical displacement is zero, and N ≥16:± (3% × reading + 0.1div + 1mV) only 10mV/div or greater is selected. When vertical displacement is not zero, and N≥16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 5V/div
Trigger types: Edge, Video, Pulse, Slope, Over time, Alternative
Trigger modes: Auto, Normal, Single
Coupling type: DC, AC, Noise Reject, HF Reject, LF Reject
Holdoff range: 100ns ~ 10s
Readout resolution: 6 digits
Accuracy (typical):±30ppm (including all frequency reference errors and ±1 count errors)
Frequency range: AC coupled, from 4Hz minimum to rated bandwidth
Output voltage: About 5Vpp into ≥1MΩ load
Size: 385mm x 200mm x 245mm
- Garansi distributor
The Hantek DSO5102P provides you with excellent performance in a compact design. It's loaded with standard features including USB connectivity, automated measurements, limit testing, data loading, and context-sensitive measurement that allow this digital storage oscilloscope to help you get more done in less time.
Hantek DSO5102P Specifications
100MHz bandwidth
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800x480)
Record length up to 40K
USB host and device connectivity, standard (note: USB port is NOT intended to be used to recharge cell phones & other usb charged devices. )
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
Acquisition modes: normal, peak detect, average
Inputs coupling: AC, DC, GND
Inputs impedance: 1MΩ±2% ‖ 20pF±3pF
Probe attenuation: 1X, 10X
Maximum input voltage: CAT I and CAT II: 300VRMS (10×), Installation Category CAT III: 150VRMS (1×) Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.
Waveform interpolation: (sin x)/x
Sample rate and delay time accuracy: ±50ppm(at over any ≥1ms time interval)
Position range: 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s
Rise time at BNC: 3.5ns
Math: +, -, *, /, FFT
FFT windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman, 1024 sample point
Bandwidth limit: 20MHz
Low frequency response: (-3db) >≤10Hz at BNC
DC gain accuracy: ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
DC measurement accuracy: When vertical displacement is zero, and N ≥16:± (3% × reading + 0.1div + 1mV) only 10mV/div or greater is selected. When vertical displacement is not zero, and N≥16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 5V/div
Trigger types: Edge, Video, Pulse, Slope, Over time, Alternative
Trigger modes: Auto, Normal, Single
Coupling type: DC, AC, Noise Reject, HF Reject, LF Reject
Holdoff range: 100ns ~ 10s
Readout resolution: 6 digits
Accuracy (typical):±30ppm (including all frequency reference errors and ±1 count errors)
Frequency range: AC coupled, from 4Hz minimum to rated bandwidth
Output voltage: About 5Vpp into ≥1MΩ load
Size: 385mm x 200mm x 245mm
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan