Ubiquiti UAP AC IW UniFi in Wall UAP-AC-IW 802.11ac WiFi Access Point

UniFi In-Wall Access Point

Convert an Ethernet wall jack into a dual-band 802.11AC Wi-Fi access point with two Gigabit Ethernet ports.

Ideal for new or retrofit installations, the UniFi AC In-Wall is designed to convert an Ethernet wall jack into a dual-band 802.11AC Wi-Fi access point with two Gigabit Ethernet ports. One of the ports provides PoE for powering and connecting an 802.3af device to the network. The UniFi AC In-Wall is capable of wireless speeds of up to 1167 Mbps with a range of up to 100 meters.
Features:

Simultaneous Dual-Band 802.11ac Access Point
(1) Internal 802.3at Gigabit Ethernet Port for Data + PoE In
(1) External Gigabit Ethernet Port for Data + 48V PoE Out*
(1) External Gigabit Ethernet Port for Data Only
Mounts in 1-Gang Electrical Wall Box
Managed by UniFi Controller Software

* NOTE: Please note that PoE Out power cannot be disabled

UAP-AC-IW
Dimensions 139.7 x 86.7 x 25.75 mm
(5.5 x 3.41 x 1.01")
Weight 200 g
(6.43 oz)
Networking Interface (3) 10/100/1000 Ethernet Ports
Buttons Reset
Power Method 802.3at PoE+ Supported
Power Supply UniFi PoE Switch (Not Included)
Power Save Supported
PoE Out 48V Pass-Through (Pins 1, 2+; 3, 6-)
Maximum Power Consumption
with PoE Passthrough 7W
19W*
Maximum TX Power
2.4 GHz
5 GHz
20 dBm
20 dBm
Antennas
2.4 GHz
5 GHz (1) Dual-Band Antenna, Single-Polarity
1 dBi
2 dBi
Wi-Fi Standards 802.11 a/b/g/n/r/k/v/ac
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID Up to 8 per Radio
Mounting 1-Gang Electrical Wall Box (Not Included)
Operating Temperature -10 to 50 C (14 to 122 F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
Advanced Traffic Management
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 250
Supported Data Rates (Mbps)
Standard Data Rates
802.11ac 6.5 Mbps to 867 Mbps (MCS0 -MCS9 NSS1/2, VHT 20/40/80)
80