OPM 3 in 1 OPM VFL Network Cable Test 3 in 1 Optical Power Meter CASS

OPM 3 IN 1 MODEL CASS/CHARGER 3 in1 Optical Power Meter Visual Fault Locator Network Cable Test optical fiber tester, 5km Visual Fault Locator Wavelength range: 800-1700 Connector: FC / SC / ST Detector type: InGaAs Measuring range: -70 to +3 Uncertainty: 5% Standard Wavelength (nm): 850 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm, Display resolution: linear display, 0.1% logarithmic display: 0.01dBm Red working wavelength: 650nm Red power: gt; 5mW Operating temperature: -10 ~ +60 #39; #34; Storage temperature: -25 ~ +70 #39; #34; Automatic shutdown time: 10min Battery continuous working hours (h): #39;48 Product Size: 118 * 68 * 30mm Power: 1.5VAAA * 2 Weight: 0.14KG Note: The product does not include batteries product advantages 1. Cable test function Operation method: Long press UNIT key for 3 seconds to open RJ45 test mode, then press to close RJ45 test mode 2. High quality imported laser head Penetrating farther, longer life. 4. Can choose 6 kinds of wavelength: 850nm.1300nm.1310nm.1490nm.1550nm.1625nm. Support three kinds of interface: FC interface .SC interface, ST interface 5. Outgoing maintenance only one machine Optical Power Meter + Visual Fault Locator + Network Cable Test 6. DIY self-calibration According to the actual test needs self-test parameters At the same time press the + REF + UNIT button, enter the user mode, the screen displays the letter #34;CAL #34; Button UNIT, reducing 0.05dB Press the power button. Save Press the key to switch the wavelength Press REF, increase 0.05dB Set the current test result as a reference value, make relative power measurement, the display will show the set DBM