UNISTRUT P1546, P2905 thru P2100 2 Hole Outside Angle Fitting

Unistrut P1546, P2905 thru P2100 2 Hole Outside Angle Fitting For 1-5/8 #34; Channel Strut Description : Fittings - General Information Material Unless otherwise noted, all fittings are punch press formed from plate or strip steel. Fitting Application All product drawings illustrate only one application of each fitting. In most cases many other applications are possible. The members shown in the illustrations are P1000, 41mm square, except where noted otherwise. All 14mm diameter holes use M12 x 24 hex head set screws and M12 nuts - P1010, P4010 or P5510 - depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered seperately Design Load Data Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5. Finishes All fittings in this section are available in zinc plated finish to Unistrut Standard AS1789 and Hot Dipped Galvanised to AS/NS4680 General Data Part No. : P1546H Finish : Hot Dipped Galvanised Description : 45 Degrees Angular FITTING Hole Size : 14mmDiameter Hole Spacing : 21mm from end, 48mm on centre Width : 40mm Thickness : 6mm Box/Bndl Qty : 10 Mass kg/100 : 26 kg