Rigol DP831 3 Outputs Programmable DC Power Supply 160W, 3CH 8V/5A || 30V/2A,-30V/2A, CH1:1mV/1mA, CH2/3:10mV/10mA resolution.

Rigol DP831 3 Outputs Programmable DC Power Supply
160W, 3CH (8V/5A || 30V/2A,-30V/2A), CH1:1mV/1mA, CH2/3:10mV/10mA resolution. Ripple
Features :
-3 outputs, 8V/5A || 30V/2A, -30V/2A, total power up to 160W
-Low Ripple Noise 350 uVrms/2mVpp
-Excellent linear regulation rate and load regulation rate
-Fast transient response time: 50 us
-Some channels are isolated
-Standard OVP/OCP/OTP protection functions
-Standard timing output
-Built in V, A, W measurements and waveform display
-Independent control for each channel
-Support more advanced functions: timer and delay output (standard)
-3.5 inch TFT Display
-Various interfaces: USB Host & Device (standard),

Specification
-Channel : 3
-DC Output : (0 deg C to 40 deg C )
-Voltage/current:
CH1: 0 to 8V/0 to 3A
CH2: 0 to 30V/0 to 2A
CH3: 0 to -305V/0 to 2A
-OVP/OCP
CH1: 10mV~8.8V/1mA~5.5A
CH2: 10mV~33V/1mA~2.2A
CH3: -10mV~33V/1mA~2.2A
-Load Regulation Rate (Output Percentage + Offset)
Voltage 0 .01%+2mV
Current 0 .01%+250uA
-Linear Regulation Rate (Output Percentage + Offset)
Voltage 0 .01%+2mV
Current 0 .01%+250uA
-Ripples and Noise (20Hz to 20MHz)
-Normal Mode Voltage -Normal Mode Current 2mArms
-Annual Accuracy (25 deg C ; 5deg C ) (Output Percentage + Offset)
-Programming
Voltage 0.1% + 5mV (CH1) ; 0.05% + 20mV (CH2 & CH3)
Current 0.2% + 5mA (CH1 ; CH2 & CH3)
-Readback
Voltage 0.1% + 5mV (CH1) ; 0.05% + 10mV (CH2 & CH3)
Current 0.2% + 10mA (CH1) ; 0.1% + 5mA (CH2 & CH3)
- Resolution
Programming Voltage 1mV (CH1) ; 10mV (CH 2 & CH3)
Programming Current 1mA (CH1 ; CH 2 & CH3)
Readback Voltage 1mV (CH1 ; CH 2 & CH3)
Readback Current 1mA (CH1 ; CH 2 & CH3)
Display Voltage 10mV (CH1 ; CH 2 & CH3)
Display Current 10mA (CH1 ; CH 2 & CH3)

Standar Aksesori (include) :
-USB Cable
-Power Cord
-Spare Fuses ( 250v/6.3A, 250V/3.15A)
-DP800 Quick Guide

Garansi Resmi Distributor : 3 Tahun (Cacat Pabrik)
more info : http://www•unitronicjaya•com